Freecad0.16-17-18/32-64bit+HeeksCAD1.1.0+HeeksCNC+blendercam
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Wolfgang,
No knowed Linuxcnc simulation for tahrpup.
A rtai patched kernel puppy would for shure be appreciated seeing the interest in linxcnc debiandog rtai..no offence saintless to debdog,but it is a puppy of is own...
Shame on me...I still use Mach3 at home&work .
.but do got linuxcnc debaindog rtai cutting realtime at home.
You could look at blendercam too,so should I ,to eventually "puppyfy" it...
Gsimple look fine..run in wine too..5Mb of disk space.
I included missing libs in Heekscad/cnc in a "1.0.0.B" version.
Made it grows from 9Mb to 34...
report these sfs related problems here please.
Vverve
No knowed Linuxcnc simulation for tahrpup.
A rtai patched kernel puppy would for shure be appreciated seeing the interest in linxcnc debiandog rtai..no offence saintless to debdog,but it is a puppy of is own...
Shame on me...I still use Mach3 at home&work .
.but do got linuxcnc debaindog rtai cutting realtime at home.
You could look at blendercam too,so should I ,to eventually "puppyfy" it...
Gsimple look fine..run in wine too..5Mb of disk space.
I included missing libs in Heekscad/cnc in a "1.0.0.B" version.
Made it grows from 9Mb to 34...
report these sfs related problems here please.
Vverve
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
hi Vverve,
Your Heeks I will test immediately.
found today the new qcad and converted it into a sfs. You can download it from my dropbox:
https://www.dropbox.com/sh/ho6llzv1eryu ... U0Jka?dl=0
Do you know Estlcam?
So you can conveniently generate a 2D drawing a CNC Prog. I get it under wine not to run to even though I have mono installed.
Maybe this is for you too interesting?
Wolfgang
Your Heeks I will test immediately.
found today the new qcad and converted it into a sfs. You can download it from my dropbox:
https://www.dropbox.com/sh/ho6llzv1eryu ... U0Jka?dl=0
Do you know Estlcam?
So you can conveniently generate a 2D drawing a CNC Prog. I get it under wine not to run to even though I have mono installed.
Maybe this is for you too interesting?
Wolfgang
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Good things if you have too much ram!!!!! If I understand correctlyfor Heeks there are a lot of sfs and to much ram!
Wolfgang
,it works?
About cam ,there are lots of "free download /low cost" cam programs out there for linux , M$ /wine.
I used blender/gcodegenerator plugin with succes on 2/2.5d project.
A nice tutorial for it if ever: http://www.rab3d.com/tut_blender.php
I learned a lots there. I tend to like blender as cad...maybe because i aint got knowledge of $olidwork/Catia/etc...
If you design your plane ,keep in mind ,freecad found here come from dev daily build ,always bring a parachute ...
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
it works and 100MB (4_5_freecad-dev0.15deps_only.sfs + heekscad+heekscnc-1.0.0.B.sfs) for HeekCAD + CNC is ok!Revolverve wrote:Yes Wolfgang to shrink just extract it,modify it ,dir2sfs it .
Or , download the latest heekscad ,
same first post link/heekscad/heek...1.0.0.B.sfs ,
it should work with 4_5_freecad-dev0.15deps_only.sfs....it work for me.
vVerve
is there a step by step doku for Heeks-Dummys?
Wolfgang
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
Hi Vverve,
Can you help me Estlcam to get to work?
It requires mono.
It is to convert dxf to CNC programs for me the best program.
http://www.estlcam.com/
Can you help me Estlcam to get to work?
It requires mono.
It is to convert dxf to CNC programs for me the best program.
http://www.estlcam.com/
- Attachments
-
- estlcam.jpg
- Estlcam
- (35.67 KiB) Downloaded 861 times
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
Hi Vverve,
Estlcam is running!!!
It will run with playonlinux!
Basic is http://www.murga-linux.com/puppy/viewtopic.php?t=90396
in addition I installed in playonlinux .net and gdiplus.
What is still missing is to make the whole package a nice sfs !!
No idea how to get the best created!
Estlcam is running!!!
It will run with playonlinux!
Basic is http://www.murga-linux.com/puppy/viewtopic.php?t=90396
in addition I installed in playonlinux .net and gdiplus.
What is still missing is to make the whole package a nice sfs !!
No idea how to get the best created!
- Attachments
-
- estlcam-playonlinux.png
- Estlcam on Playonlinux
- (76.63 KiB) Downloaded 865 times
-
- Posts: 1045
- Joined: Mon 26 Nov 2007, 22:07
- Location: Blomberg / Germany
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Freecad 0.16 SFS
See first post : uploaded freecad 0.16 dev + updated hamish assembly2 ++ SFS , tested on Tahrpup 6.03 , save often...
PLZ report here only sfs related whatever you find missing/weird/broken/fun/obsolete/etc in it...
PLZ report here only sfs related whatever you find missing/weird/broken/fun/obsolete/etc in it...
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Freecad with the path module,arch,assembly2++
Freecad team merge the CAM module in their master branch .
Available for testing with basic functions . Generating gcode from one package is a plus.
Keep in mind ,no stable release here ,back it up often .
See first post(edited many times..and more to come...as I try to keep it as a "main" details/ news/personal memo resources)
Available for testing with basic functions . Generating gcode from one package is a plus.
Keep in mind ,no stable release here ,back it up often .
See first post(edited many times..and more to come...as I try to keep it as a "main" details/ news/personal memo resources)
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
soixante quatre 64 bit
Freecad-dev 64 bit for tahrpup_64 beta
Will it survive post-beta,gamma,rc?we'll see...
Packages included (96)list in attachment.
Read first post.
Will it survive post-beta,gamma,rc?we'll see...
Packages included (96)list in attachment.
Read first post.
- Attachments
-
- freecad-dev-sfs-pkg-list.tar
- (30 KiB) Downloaded 615 times
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Freecad-dev 64 bit for tahr64 6.0.4
Freecad-dev 64 bit for tahrpup_64 beta
Will it survive post-beta,gamma,rc?
Yes....seems 6.0.4 ok
Will it survive post-beta,gamma,rc?
Yes....seems 6.0.4 ok