tahrpup 6.0, 6.0.2 & 6.0.5 CE
I've just updated jwmthememaker to v 1.6. Now it can generate preview pics (for jwm theme swicther automagically. If anyone would test and report, will be much appreciated
http://murga-linux.com/puppy/viewtopic. ... 721#330721
I tried, it wont work correctly.
1. font list is listed with full path
2. ffmpeg is not installed
edit:
Version 1.6.1: fix fc-list compatibility. Fully working for precise 5.7.1 and slacko 5.7, also with fc-list of tahr 6.0 (but tahr needs proper ffmpeg to make jwmthememaker create preview pics, other than that it works)
http://murga-linux.com/puppy/viewtopic. ... 721#330721
I tried, it wont work correctly.
1. font list is listed with full path
2. ffmpeg is not installed
edit:
Version 1.6.1: fix fc-list compatibility. Fully working for precise 5.7.1 and slacko 5.7, also with fc-list of tahr 6.0 (but tahr needs proper ffmpeg to make jwmthememaker create preview pics, other than that it works)
Last edited by trio on Sat 01 Nov 2014, 11:35, edited 2 times in total.
Thanks to the all the developers of this great version. This has made my weekend.
Tried to create an encrypted save file (light) on first shutdown. Won't let me log in on next boot up. Unencrypted save file is fine.
Also, when trying to update the PPM, I'm getting a little error message on the yellow screen among the rest of the scrolling messages that there is a "compilation failure". Doesn't seem to cause any obvious problems though. Will keep an eye on it and post any adverse effects back here.
Tried to create an encrypted save file (light) on first shutdown. Won't let me log in on next boot up. Unencrypted save file is fine.
Also, when trying to update the PPM, I'm getting a little error message on the yellow screen among the rest of the scrolling messages that there is a "compilation failure". Doesn't seem to cause any obvious problems though. Will keep an eye on it and post any adverse effects back here.
Life is too short to spend it in front of a computer
A report of problems with VIA Unichrome PRO S3G IGP graphics at:
http://www.murga-linux.com/puppy/viewtopic.php?t=96271
http://www.murga-linux.com/puppy/viewtopic.php?t=96271
akshayk wrote:I tried booting with pfix=nox option. Then, after running xorgwizard, I was presented with the keyboard and time setting screens (They worked fine). Then I had the screen which asked the type of driver for xorg. It had only one option- modesetting unaccelerated driver I chose it, and then it asked for the resolution. I chose NOTHING Let Xorg guess it. Then I asked to "Test X Now" After clicking enter, there was a black screen with no monitor input. I also tried 640x480 resolution, but with the same result.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Just created a 64MiB savefile with password test and all is ok.tronkel wrote:Tried to create an encrypted save file (light) on first shutdown. Won't let me log in on next boot up.
Did you use some special characters or diacritics?
If so, perhaps specifying pkeys=your_keyboard_layout at boot would help...
___________
Yeah, the old annoyance with Rox.Keef wrote:Probably turn out to just me, but to make sure, can someone open /proc with Rox, and see what happens. If no-one else has a problem, I shall say no more...
Happens if Thumbnails are enabled.
Latest version has it fixed, I think thanks to this commit.
___________
@666philb: (a little late, but) Congrats!
Greetings!
[color=red][size=75][O]bdurate [R]ules [D]estroy [E]nthusiastic [R]ebels => [C]reative [H]umans [A]lways [O]pen [S]ource[/size][/color]
[b][color=green]Omnia mea mecum porto.[/color][/b]
[b][color=green]Omnia mea mecum porto.[/color][/b]
What I see:Keef wrote:Probably turn out to just me, but to make sure, can someone open /proc with Rox, and see what happens. If no-one else has a problem, I shall say no more...
In Rox
click on /proc
it opens to show contents.
However, Rox screen is frozen.
Right click at top of window and choose kill.
Window closes and desktop disappears to black screen.
Have to restart X-server to get desktop back.
Tried SFR's above pet for Rox.
Does not seem to fix problem for me.
666philb,
Are you pulling your hair yet?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
It's ok here (see screenie). Did you restart X?bigpup wrote:Tried SFR's above pet for Rox.
Does not seem to fix problem for me.
I replaced only the main binary: /usr/local/apps/ROX-Filer/ROX-Filer.
Greetings!
- Attachments
-
- Screenshot.gif
- (185.02 KiB) Downloaded 945 times
[color=red][size=75][O]bdurate [R]ules [D]estroy [E]nthusiastic [R]ebels => [C]reative [H]umans [A]lways [O]pen [S]ource[/size][/color]
[b][color=green]Omnia mea mecum porto.[/color][/b]
[b][color=green]Omnia mea mecum porto.[/color][/b]
whats leftbigpup wrote: 666philb,
Are you pulling your hair yet?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- neerajkolte
- Posts: 516
- Joined: Mon 10 Feb 2014, 07:05
- Location: Pune, India.
Hi,
I installed Tahrpup6 to my 1gb usb manually using isolinux.
I wanted to create savefolder on my hard drive.
But at shutdown it only gives me option to make savefile and that too in my usb only.
Could you suggest anything I should do.
Thanks.
- Neeraj.
I installed Tahrpup6 to my 1gb usb manually using isolinux.
I wanted to create savefolder on my hard drive.
But at shutdown it only gives me option to make savefile and that too in my usb only.
Could you suggest anything I should do.
Thanks.
- Neeraj.
"One of my most productive days was throwing away 1000 lines of code."
- Ken Thompson
“We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.â€
- Amara’s Law.
- Ken Thompson
“We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.â€
- Amara’s Law.
You should boot with boot option:neerajkolte wrote:Hi,
I installed Tahrpup6 to my 1gb usb manually using isolinux.
I wanted to create savefolder on my hard drive.
But at shutdown it only gives me option to make savefile and that too in my usb only.
Could you suggest anything I should do.
Code: Select all
boot: pmedia=atahd
OK.SFR wrote:It's ok here (see screenie). Did you restart X?bigpup wrote:Tried SFR's above pet for Rox.
Does not seem to fix problem for me.
I replaced only the main binary: /usr/local/apps/ROX-Filer/ROX-Filer.
Greetings!
Installed rox_filer-140729.pet
Did the secret step restart X server.
open /proc in Rox now works.
side effect:
The desktop background changed to Gray screen from an image.
For some reason the desktop console icon has changed to a sym link.
I just lost a hair from pulling
- Attachments
-
- capture4205.png
- (22.75 KiB) Downloaded 801 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Most likely some config files in that pet differ from those in Tahr (it's a package for Slacko 6, after all).bigpup wrote:side effect:
The desktop background changed to Gray screen from an image.
For some reason the desktop console icon has changed to a sym link
If you uninstall it and replace only the binary as Keef did, things should back to normal.
PS. Don't forget the secret step.
Greetings!
[color=red][size=75][O]bdurate [R]ules [D]estroy [E]nthusiastic [R]ebels => [C]reative [H]umans [A]lways [O]pen [S]ource[/size][/color]
[b][color=green]Omnia mea mecum porto.[/color][/b]
[b][color=green]Omnia mea mecum porto.[/color][/b]
I think I will let 666philb tweak it with an update and see if he did it right.
He now knows what should work to fix Rox.
I hear head scratching sounds now
He now knows what should work to fix Rox.
I hear head scratching sounds now
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
Graphic driver pets are now here for testing.
See this topic post:
http://www.murga-linux.com/puppy/viewto ... 424#806424
See this topic post:
http://www.murga-linux.com/puppy/viewto ... 424#806424
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 4
- Joined: Tue 07 May 2013, 15:33
Bugs with Compaq Presario CQ62
So I booted Tahrpup 6.0 CE from my windows partition. I'm using a Compaq Presario CQ62 laptop and although the OS booted up without problems my mouse does not move and non of my network interfaces were detected. I could not make further progress with the system. Slacko 5.7 PAE, on the other hand, works flawlessly.
- MochiMoppel
- Posts: 2084
- Joined: Wed 26 Jan 2011, 09:06
- Location: Japan
I haven't had time yet to test thoroughly, but some issues I noticed:
- Heartbleed bug not fixed
Uses affected version OpenSSL 1.0.1f 6 Jan 2014
- ROX overwrite confirm bug not fixed
- JWM seems to have an issue with tray item borders. There are none, though border attirbutes are set. With many windows open it's almost impossible to distinguish windows in the tasklist when they have no icon. I copied over an older JWM from Slacko and this worked as expected.
- xclip (/usr/X11R7/bin/xclip) is outdated. Version 0.08 lacks UTF-8 support. Fixed in version 0.12
- Doesn't wake up after suspended to RAM. To suspend I use command
- Same issues with SCSI drivers as in Slacko6
- Heartbleed bug not fixed
Uses affected version OpenSSL 1.0.1f 6 Jan 2014
- ROX overwrite confirm bug not fixed
- JWM seems to have an issue with tray item borders. There are none, though border attirbutes are set. With many windows open it's almost impossible to distinguish windows in the tasklist when they have no icon. I copied over an older JWM from Slacko and this worked as expected.
- xclip (/usr/X11R7/bin/xclip) is outdated. Version 0.08 lacks UTF-8 support. Fixed in version 0.12
- Doesn't wake up after suspended to RAM. To suspend I use command
Code: Select all
sync && echo -n mem > /sys/power/state
MochiMoppel wrote:I haven't had time yet to test thoroughly, but some issues I noticed:
- Heartbleed bug not fixed
Uses affected version OpenSSL 1.0.1f 6 Jan 2014
Code: Select all
# openssl version -b
built on: Wed Oct 15 17:44:24 UTC 2014
# openssl version
OpenSSL 1.0.1f 6 Jan 2014
#
- neerajkolte
- Posts: 516
- Joined: Mon 10 Feb 2014, 07:05
- Location: Pune, India.
Thanks watchdog,watchdog wrote:You should boot with boot option:Code: Select all
boot: pmedia=atahd
This works out nicely.
Now I have placed my puppy_tahr_6.0.sfs and zdrv_tahr_6.0.sfs and my savefolder on my hdd partition sda8. (Edit: But Copying main files vmlinuz, initrd.gz, syslinux.cfg to HD as you suggested was not needed. They still reside on my usb.)
My syslinux.cfg reads
Code: Select all
label 3
kernel /tahrpup6/vmlinuz
initrd /tahrpup6/initrd.gz
append pmedia=atahd pupsfs=sda8:/tahr-6/puppy_tahr_6.0.sfs zdrv=sda8:/tahr-6/zdrv_tahr_6.0.sfs pupsave=sda8:/tahr-6/tahrsave-6
Thanks.
- Neeraj
"One of my most productive days was throwing away 1000 lines of code."
- Ken Thompson
“We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.â€
- Amara’s Law.
- Ken Thompson
“We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.â€
- Amara’s Law.