tahrpup 6.0, 6.0.2 & 6.0.5 CE
-
- Posts: 63
- Joined: Sun 02 Oct 2016, 20:17
update
here is new update I find vnstat which is nice tool for to see net use and its working nice for lucid puppy but not in tahr pup
discussion going on here>> http://murga-linux.com/puppy/viewtopic. ... 940#926940
answer of your question
--i use default bootloder for lucid pup 528 and tahr pup
-- No, not similiar, no syslinux.cfg, only init,vmlin,one sfs and one 4fs file
discussion going on here>> http://murga-linux.com/puppy/viewtopic. ... 940#926940
answer of your question
--i use default bootloder for lucid pup 528 and tahr pup
-- No, not similiar, no syslinux.cfg, only init,vmlin,one sfs and one 4fs file
Last edited by puppytahruser on Tue 04 Oct 2016, 20:51, edited 1 time in total.
-
- Posts: 63
- Joined: Sun 02 Oct 2016, 20:17
Good news
Good news vnstat is working on tahr pup. I had to rename the pet file then it successfully installed and now running
Broken Links in the Tahr64 Help
The ASH link in the programming section points to Leaf, not ASH webpage.
The gtkdialog3 links are broken, except for zigbert's page.
The puppylinux.com/hard-puppy link is broken.
The puppylinux.com/development/create-pet.htm is broken.
Hope this is helpful.
The gtkdialog3 links are broken, except for zigbert's page.
The puppylinux.com/hard-puppy link is broken.
The puppylinux.com/development/create-pet.htm is broken.
Hope this is helpful.
Hello
I am having problems with 1280x1024 resolution and intel 82Q35 express integrated graphics controller. Its on a dell optiplex 755, dual core 2ghz,2gb ram.
I realy like tahr so want it to work.
Tahr 605 with kernel 56 works on everything, except 1280x1024 res.
If I put on 3.4.103 kernel I get 1280x1024 but no network adapters at all.
Any chance of a fix for this please as tahr to me is by far the best.
Thanks
number77
I am having problems with 1280x1024 resolution and intel 82Q35 express integrated graphics controller. Its on a dell optiplex 755, dual core 2ghz,2gb ram.
I realy like tahr so want it to work.
Tahr 605 with kernel 56 works on everything, except 1280x1024 res.
If I put on 3.4.103 kernel I get 1280x1024 but no network adapters at all.
Any chance of a fix for this please as tahr to me is by far the best.
Thanks
number77
From the Tahr with a working network connection..
Copy'n paste from >> PupSysInfo >> Devices >> Network. Goto "File" >> Export current report.
Then >> Drivers >> Reports >> "Summary" and do the same.
PS -- It's helpful to know when you've posted elsewhere.
PSS -- On the version that network doesn't fly, do you see the same file/folders in my screen shot?
Copy'n paste from >> PupSysInfo >> Devices >> Network. Goto "File" >> Export current report.
Then >> Drivers >> Reports >> "Summary" and do the same.
PS -- It's helpful to know when you've posted elsewhere.
PSS -- On the version that network doesn't fly, do you see the same file/folders in my screen shot?
- Attachments
-
- your_driver.jpg
- (30.16 KiB) Downloaded 1905 times
This may come out
Working
====> 43 Loaded Kernel Modules (lsmod) <====
Total Memory Used: 1421.89 KB
MODULE: BYTES USED BY
cfg80211 133384 0
coretemp 3984 0
drm 145780 3 i915,drm_kms_helper
drm_kms_helper 23752 1 i915
dvb_core 53384 2 dvb_usb_ttusb2,dvb_usb
dvb_usb 10708 1 dvb_usb_ttusb2
dvb_usb_ttusb2 11816 0
e1000e 124404 0
hwmon 1328 1 coretemp
hwmon_vid 1588 0
i2c_algo_bit 3456 1 i915
i2c_i801 6904 0
i915 491840 2
intel_agp 7072 0
intel_gtt 7248 3 i915,intel_agp
ip_tables 7228 1 iptable_filter
iptable_filter 700 0
lpc_ich 11052 0
parport 18924 1 parport_pc
parport_pc 17032 0
pps_core 3976 1 ptp
psmouse 56825 0
ptp 4692 1 e1000e
rc_core 7904 2 dvb_usb_ttusb2,dvb_usb
rfkill 5402 1 cfg80211
snd 29832 12 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_analog
snd_hda_codec_analog 5056 1
snd_hda_codec_generic 28868 1 snd_hda_codec_analog
snd_hda_intel 22516 0
snd_mixer_oss 8668 1 snd_pcm_oss
snd_pcm 45956 4 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_pcsp
snd_pcm_oss 24016 0
snd_pcsp 4241 0
snd_rawmidi 10304 1 snd_seq_midi
snd_seq 26592 6 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_device 2924 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_dummy 605 0
snd_seq_midi 2864 0
snd_seq_midi_event 2760 2 snd_seq_oss,snd_seq_midi
snd_seq_oss 15932 0
snd_timer 10302 2 snd_pcm,snd_seq
video 8814 1 i915
Non working
Has nothing in at all
Working Ethernet
====> Network Devices <====
Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
+ Kernel Driver: e1000e
+ Memory Used: 121.49 KB
+ Path: /lib/modules/3.14.56/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
+ Driver Version: 2.3.2-k
+ Description: Intel(R) PRO/1000 Network Driver
Non working
====> Network Devices <====
Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
Working
====> 43 Loaded Kernel Modules (lsmod) <====
Total Memory Used: 1421.89 KB
MODULE: BYTES USED BY
cfg80211 133384 0
coretemp 3984 0
drm 145780 3 i915,drm_kms_helper
drm_kms_helper 23752 1 i915
dvb_core 53384 2 dvb_usb_ttusb2,dvb_usb
dvb_usb 10708 1 dvb_usb_ttusb2
dvb_usb_ttusb2 11816 0
e1000e 124404 0
hwmon 1328 1 coretemp
hwmon_vid 1588 0
i2c_algo_bit 3456 1 i915
i2c_i801 6904 0
i915 491840 2
intel_agp 7072 0
intel_gtt 7248 3 i915,intel_agp
ip_tables 7228 1 iptable_filter
iptable_filter 700 0
lpc_ich 11052 0
parport 18924 1 parport_pc
parport_pc 17032 0
pps_core 3976 1 ptp
psmouse 56825 0
ptp 4692 1 e1000e
rc_core 7904 2 dvb_usb_ttusb2,dvb_usb
rfkill 5402 1 cfg80211
snd 29832 12 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_analog
snd_hda_codec_analog 5056 1
snd_hda_codec_generic 28868 1 snd_hda_codec_analog
snd_hda_intel 22516 0
snd_mixer_oss 8668 1 snd_pcm_oss
snd_pcm 45956 4 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_pcsp
snd_pcm_oss 24016 0
snd_pcsp 4241 0
snd_rawmidi 10304 1 snd_seq_midi
snd_seq 26592 6 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_device 2924 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_dummy 605 0
snd_seq_midi 2864 0
snd_seq_midi_event 2760 2 snd_seq_oss,snd_seq_midi
snd_seq_oss 15932 0
snd_timer 10302 2 snd_pcm,snd_seq
video 8814 1 i915
Non working
Has nothing in at all
Working Ethernet
====> Network Devices <====
Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
+ Kernel Driver: e1000e
+ Memory Used: 121.49 KB
+ Path: /lib/modules/3.14.56/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
+ Driver Version: 2.3.2-k
+ Description: Intel(R) PRO/1000 Network Driver
Non working
====> Network Devices <====
Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
Last edited by number77 on Mon 14 Nov 2016, 12:40, edited 1 time in total.
The driver's there, though not where I'd expect it. For whatever reason it's not loading.
Boot your 3.4.103 kernel system, dump both of the reports I requested and place them somewhere on your "home" partition so you can retrieve them from one of your systems where Internet works. It's otherwise impossible to tell what's loading from a system that isn't under boot.
*Small favor.. Thank you.
Boot your 3.4.103 kernel system, dump both of the reports I requested and place them somewhere on your "home" partition so you can retrieve them from one of your systems where Internet works. It's otherwise impossible to tell what's loading from a system that isn't under boot.
*Small favor.. Thank you.
>>> Living with the immediacy of death helps you sort out your priorities. It helps you live a life less trivial <<<
Who's responsible for the 32b repos MyPaint pet?
Code: Select all
unxz: (stdin): File format not recognized
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
>>> Living with the immediacy of death helps you sort out your priorities. It helps you live a life less trivial <<<
Hi,
I get a problem when i want to print with a recent firefox, glabels and thunderbird, all gtk3 applications : when i want to print the software closes.
I get this error in the terminal
It seems there is a compatibility problem between cups and gtk3.
Cups is in 1.5.3 version.
Thanks for your help,
Philippe
EDIT I'm with tarhpup 6.0.5 and all quickpet updates made.
I get a problem when i want to print with a recent firefox, glabels and thunderbird, all gtk3 applications : when i want to print the software closes.
I get this error in the terminal
Code: Select all
/usr/lib/firefox/firefox: symbol lookup error: /usr/lib/i386-linux-gnu/gtk-3.0/3.0.0/printbackends/libprintbackend-cups.so: undefined symbol: ippSetOperation
Cups is in 1.5.3 version.
Thanks for your help,
Philippe
EDIT I'm with tarhpup 6.0.5 and all quickpet updates made.
I figured out a trick with tahrpup and mouse integration in virtual box.
It works as follows.
1. Install guest addtions
2. "Right control key"+home key, then select input / mouse integration
3. Then press "cntrl-alt-backspace"
4. Then type xwin
This works in tahrpup 6.0.6 with full screen mode. I haven't tried it yet in the other modes yet. I think the problem is that the mouse integration has to start up before the x based desktop. Where virtualbox installs the start-up scrips, starts the mouse integration up too late in tahrpup. Fatdog64 doesn't have this issue.
It works as follows.
1. Install guest addtions
2. "Right control key"+home key, then select input / mouse integration
3. Then press "cntrl-alt-backspace"
4. Then type xwin
This works in tahrpup 6.0.6 with full screen mode. I haven't tried it yet in the other modes yet. I think the problem is that the mouse integration has to start up before the x based desktop. Where virtualbox installs the start-up scrips, starts the mouse integration up too late in tahrpup. Fatdog64 doesn't have this issue.
I'm trying to add a user on tahrpup 6.0.6
Here is my command
And in /var/log/messages
it says
I'll try creating the file and see what happens. It would be good though for me to better understand what is going on .
Here is my command
Code: Select all
root# adduser --home /mnt/Freenet --gid 502 freenet --disabled-login
Warning: The home dir /mnt/Freenet you specified already exists.
Adding user `freenet' ...
Adding new user `freenet' (1003) with group `spot' ...
adduser: `/usr/sbin/useradd -d /mnt/Freenet
it says
Code: Select all
Dec 2 01:47:52 virtualTahr user.crit useradd: cannot open login definitions /etc/login.defs [No such file or directory]
Creating the file allowed me to successfully create users although I'm still getting errors. I wonder if I installed something that installed part of the shadow package but not the whole thing. I ask this because I thought that adduser was linked to busybox on tharpup. Maybe this changed in 6.0.6 though.
Anway here are the errors I'm getting in /var/log/messages
To resolve these I'll need to create more files and properly configure them starting with login.def
http://man7.org/linux/man-pages/man5/login.defs.5.html
Anway here are the errors I'm getting in /var/log/messages
Code: Select all
Dec 2 01:57:44 virtualTahr authpriv.info useradd[27395]: new user: name=freenet, UID=1003, GID=502, home=/mnt/Freenet, shell=/bin/bash
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: PAM _pam_load_conf_file: unable to open /etc/pam.d/common-auth
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: PAM error loading (null)
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: PAM _pam_init_handlers: error reading /etc/pam.d/chfn
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: PAM _pam_init_handlers: [Critical error - immediate abort]
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: PAM error reading PAM configuration file
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: PAM pam_start: failed to initialize handlers
Dec 2 01:57:44 virtualTahr authpriv.err chfn[27415]: Critical error - immediate abort
Dec 2 01:58:59 virtualTahr auth.notice su: + /dev/pts/0 root:freenet
http://man7.org/linux/man-pages/man5/login.defs.5.html
The google chrome quickpet isn't working for me on tharpup 6.0.6 inside a virtualbox.
Here is some debugging info
Here is some debugging info
Code: Select all
root# sh -x googlechrome
+ exec /opt/google/chrome/chrome-wrapper
[7:7:1210/000425:ERROR:nss_util.cc(211)] Error initializing NSS without a persistent database: NSS error code: -8023
[7:7:1210/000425:FATAL:nss_util.cc(213)] nss_error=-8023, os_error=0
How to change language in chromium
How to change language in chromium Versjon 46.0.2490.86
Tahrpup 6.0.5 kjartans (norway)
Tahrpup 6.0.5 kjartans (norway)
-
- Posts: 168
- Joined: Fri 26 Jan 2018, 20:54
https://archive.org/details/kjartans_tahrpup64uefi
xyz, they're typically changed in "Settings," Advanced.
If Chromium doesn't offer the option, strip your language pak out of something like this.
Depending on where you're installed, stick it in /usr/lib/chromium/locales with Chromium closed.
xyz, they're typically changed in "Settings," Advanced.
If Chromium doesn't offer the option, strip your language pak out of something like this.
Depending on where you're installed, stick it in /usr/lib/chromium/locales with Chromium closed.
limbomusic is a forum member..
thanks a lot :
limbomusic is a forum member.. sure he will be helper.
lot of problems. I change for artfulpup, hope better.
limbomusic is a forum member.. sure he will be helper.
lot of problems. I change for artfulpup, hope better.