Hello
I'm needing a cheap replacement graphics card for my P4 box.
I've seen this one which seems to be based on the Nvidea GT210 processor and need to know if it will a) work and b) work well with Puppy Precise?
There seem to be some references to using this core with Ubuntu so I hoped there might be a chance but wanted to ask before buying.
Thanks for any help -- the more I try to read-up about Puppy graphics drivers the more confused I seem to get
Will
Is there Nvidia GT210 support for Puppy?
I believe they were aimed at the profession graphics market so on windows you may get locked out unless you have the OEM driver...or something along those lines...the geoforces were the cheaper commersial releases of the same but with feature limited chips...again just a rough description.
This may be why they are cheaper...got stung by a ATI card like that but managed to hack the windows driver in the end.
On linux if you want full features (3D) you need nvidias proprietry driver... though nouveau is not too bad now.... hopefully there will be no such problems ...am posting as i am curious myself.
mike
This may be why they are cheaper...got stung by a ATI card like that but managed to hack the windows driver in the end.
On linux if you want full features (3D) you need nvidias proprietry driver... though nouveau is not too bad now.... hopefully there will be no such problems ...am posting as i am curious myself.
mike
-
- Posts: 156
- Joined: Fri 21 Nov 2008, 17:20
hello
Mike
The card I am looking at seems to be sold as a low-end deskto/home entertainment market product - it sells for ~£20 here in the UK. windows drivers seem to be available for XP up to 8.1 from the Asus website.
Anyone
I have now been able to confirm that I'm using (according to Hardinfo) Precise 5.7.1 with kernal 3.9.11.
Any other opinions on this graphics chip on this set up before I order?
Thanks
Will
Mike
The card I am looking at seems to be sold as a low-end deskto/home entertainment market product - it sells for ~£20 here in the UK. windows drivers seem to be available for XP up to 8.1 from the Asus website.
Anyone
I have now been able to confirm that I'm using (according to Hardinfo) Precise 5.7.1 with kernal 3.9.11.
Any other opinions on this graphics chip on this set up before I order?
Thanks
Will
The cards specs say it needs PCI-Express 2.0 interface
Does your computer have that?
It will probably work OK if all you have is PCI-Express 1.0 interface.
PCIe 2.0 cards are also generally backward compatible with PCIe 1.x motherboards, using the available bandwidth of PCI Express 1.1
So, if you only have PCI-Express 1.0 interface. The card may not run at it's max bandwidth.
PCI Express Bandwidth
PCIe 1.0a, with a per-lane data rate of 250 MB/s and a transfer rate of 2.5 gigatransfers per second (GT/s).
2.0 standard doubles the transfer rate compared with PCIe 1.0 to 5 GT/s and the per-lane throughput rises from 250 MB/s to 500 MB/s.
Does your computer have that?
It will probably work OK if all you have is PCI-Express 1.0 interface.
PCIe 2.0 cards are also generally backward compatible with PCIe 1.x motherboards, using the available bandwidth of PCI Express 1.1
So, if you only have PCI-Express 1.0 interface. The card may not run at it's max bandwidth.
PCI Express Bandwidth
PCIe 1.0a, with a per-lane data rate of 250 MB/s and a transfer rate of 2.5 gigatransfers per second (GT/s).
2.0 standard doubles the transfer rate compared with PCIe 1.0 to 5 GT/s and the per-lane throughput rises from 250 MB/s to 500 MB/s.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
I have 2 boxes running that card. The nouveau driver works fine in every Puppy version I've tried.The Nvidia driver is available for some Pups as well.
Pretty good low-budget card.
Pretty good low-budget card.
Code: Select all
root# report-video
VIDEO REPORT: tahrpup, version 6.0
Chip description:
VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768x16
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nvidia
Loaded modules: dbe dri2 extmod fb glx kbd mouse ramdac wfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (411x263 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
-
- Posts: 156
- Joined: Fri 21 Nov 2008, 17:20
Hello
James C:
Bigpup:
I've looked into the interface question and realize I won't get the fullest performance from the new card on my PCIe 1.x mainboard but need to get the box running again so I'll try it. The suppliers say it should work with PCIe 1 and they take returns so it seems worth the risk
Thank everyone
Will
James C:
That's what I needed to hear -- I've just ordered the part and will try to report back how it goes.The nouveau driver works fine in every Puppy version I've tried.The Nvidia driver is available for some Pups as well.
Bigpup:
I've looked into the interface question and realize I won't get the fullest performance from the new card on my PCIe 1.x mainboard but need to get the box running again so I'll try it. The suppliers say it should work with PCIe 1 and they take returns so it seems worth the risk
Thank everyone
Will
-
- Posts: 156
- Joined: Fri 21 Nov 2008, 17:20
Hello
I'm back, card installed and working -- Puppy came stright up and "just worked" - hows this look.
Thanks for the help.
William
I'm back, card installed and working -- Puppy came stright up and "just worked" - hows this look.
I'm getting ~960 fps in glxgears too so unless I have any problems I'll leave well alone with drivers.VIDEO REPORT: Precise Puppy, version 5.7.1
Chip description:
VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1280x1024
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1280x1024 pixels (338x270 millimeters)
Depth: 24 planes
Thanks for the help.
William