lupu 5.1 and Midori
lupu 5.1 and Midori
Hi,
@rcrsn51
Thank very much for your reply:
"In the older versions of Lupu that used Netsurf as the default browser, those menus didn't work. You need the new Lupu that has Midori as the default browser."
To my question at:
http://www.murga-linux.com/puppy/viewto ... ed1#448793
"Using CUPS 1.4.3 - if the "Maintenance" and "Administration" drop-down list menu items can be activated please be so kind as to explain how."
----------------------------------------------
I am really happy with Lucid Puppy 5.1 and I would rather not update to 5.1.1; however I would like to get the above menus to work and ask if there is a pet or another method to me to install Midori?
My regards
PS I thought my question might be of some general interest, but I did not want to clutter the main Puppy News thread (shown above) with this reply.
@rcrsn51
Thank very much for your reply:
"In the older versions of Lupu that used Netsurf as the default browser, those menus didn't work. You need the new Lupu that has Midori as the default browser."
To my question at:
http://www.murga-linux.com/puppy/viewto ... ed1#448793
"Using CUPS 1.4.3 - if the "Maintenance" and "Administration" drop-down list menu items can be activated please be so kind as to explain how."
----------------------------------------------
I am really happy with Lucid Puppy 5.1 and I would rather not update to 5.1.1; however I would like to get the above menus to work and ask if there is a pet or another method to me to install Midori?
My regards
PS I thought my question might be of some general interest, but I did not want to clutter the main Puppy News thread (shown above) with this reply.
Does the CUPS web interface open in Firefox?
If not, open it directly by going to
[Edit] Or locate the file /usr/local/bin/cupsview and change it to
If not, open it directly by going to
Code: Select all
localhost:631
Code: Select all
exec defaultbrowser localhost:631
Hi rcrsn51,
Thank you for your further help.
When I click on cupsview Firefox opens with the address http://localhost:631/ at the main CUPS screen.
I did not change anything and Firefox is still set as my default browser.
Much as I would like the menus to work I do not want you to spend a lot of your valuable time on a problem that may be specific to me.
My regards
I may raise new threads at some point as I still have two other printer/scanner issues I would like to resolve. Neither of those detract from my appreciation of Puppy which I find to be comprehensive, fast and stable.
Thank you for your further help.
When I click on cupsview Firefox opens with the address http://localhost:631/ at the main CUPS screen.
I did not change anything and Firefox is still set as my default browser.
Much as I would like the menus to work I do not want you to spend a lot of your valuable time on a problem that may be specific to me.
My regards
I may raise new threads at some point as I still have two other printer/scanner issues I would like to resolve. Neither of those detract from my appreciation of Puppy which I find to be comprehensive, fast and stable.
Hi,
It works from the 5.1.1 CD with Midori as the default browser. The CD includes Firefox 3.6.6 whereas I have v 3.6.8.
I may not upgrade until 5.2 (or even for a year or two) as almost everything works perfectly and it takes time to make all my desired changes.
If I see a pet for the latest version of Midori i will try that - otherwise I'll wait until I upgrade.
My regards
It works from the 5.1.1 CD with Midori as the default browser. The CD includes Firefox 3.6.6 whereas I have v 3.6.8.
I may not upgrade until 5.2 (or even for a year or two) as almost everything works perfectly and it takes time to make all my desired changes.
If I see a pet for the latest version of Midori i will try that - otherwise I'll wait until I upgrade.
My regards
Hi Guys,
That was the answer. I disabled my 15 add-ons en block and it worked.
I was going to try a one-at-a-time reinstall trial after reporting back here, but having read the response from DaveS I will test NoScript first.
It's good when things work and nearly as good when the cause of failure is known. Thank you for your expert help and time.
My regards
That was the answer. I disabled my 15 add-ons en block and it worked.
I was going to try a one-at-a-time reinstall trial after reporting back here, but having read the response from DaveS I will test NoScript first.
It's good when things work and nearly as good when the cause of failure is known. Thank you for your expert help and time.
My regards
Hi again,
Firefox went haywire a couple times so for now I have reset my default browser to netsurf and Firefox is back on its best behaviour, but although I have not yet been able to prove DaveS is right about NoScript I suspect he is certain to be.
I hope it is OK the ask my final unrelated printer question here?
I have a 12 year old ink-jet Epson Stylus Color 400 which prints four times faster from within Windows (at quality setting) than it does from within Puppy (either directly or from Wine). I used versions of Foxit Reader in all three tests.
I wonder if I might not be using the best driver in Puppy or if I might not have the right font in the right place, but as I'm quite clueless I would welcome any pointer or suggestion.
My regards
Firefox went haywire a couple times so for now I have reset my default browser to netsurf and Firefox is back on its best behaviour, but although I have not yet been able to prove DaveS is right about NoScript I suspect he is certain to be.
I hope it is OK the ask my final unrelated printer question here?
I have a 12 year old ink-jet Epson Stylus Color 400 which prints four times faster from within Windows (at quality setting) than it does from within Puppy (either directly or from Wine). I used versions of Foxit Reader in all three tests.
I wonder if I might not be using the best driver in Puppy or if I might not have the right font in the right place, but as I'm quite clueless I would welcome any pointer or suggestion.
My regards
Printing in Linux is always going to be slower than in Windows because of the additional layers of software that the print job must go through. Also, the print queue mechanism might be a major factor. Windows can push the print job directly through the parallel port while CUPS processes it through a queue.
Printing through Wine won't make any difference. IIRC, Wine just passes the print job back to the host's Linux printing system.
But a factor of four seems excessive. Are you using the Gutenprint driver for your Stylus C400? I have attached a PET that uses the built-in Ghostscript driver. It may be a bit faster, but I doubt it.
When you run CUPS, you will see it listed as "Epson Stylus Color 400 Foomatic/stcolor".
Printing through Wine won't make any difference. IIRC, Wine just passes the print job back to the host's Linux printing system.
But a factor of four seems excessive. Are you using the Gutenprint driver for your Stylus C400? I have attached a PET that uses the built-in Ghostscript driver. It may be a bit faster, but I doubt it.
When you run CUPS, you will see it listed as "Epson Stylus Color 400 Foomatic/stcolor".
- Attachments
-
- epson-stylus-c400.pet
- (3.71 KiB) Downloaded 444 times
Hi rcrsn51,
As you thought my ink-jet printer Make and Model is described in CUPS as:
Epson Stylus Color 400 - CUPS+Gutenprint v5.2.5.
I have two pieces of good news to report:
(I) I use Wine and I have made Internet Explorer my default browser so now none of my Firefox add-ons conflicts with my CUPS menu lists, which I can now use.
(2) So I was able to select "Print Test Page" from the Maintenance drop-down list. That took 13' 56" to print in very good quality.
When I selected "Set Default Options" from the Administration drop-down list I saw that my setting was at Standard level.
I then re-set to Fast Economy and again tried "Print Test Page" this time it took a mere 46" and the output was of good qualty (with the text printed in a pleasant light grey) though the coloured circle was less impressive.
That is some 18 times faster than the first test - so I am really pleased.
My regards (and reiterated thanks)
This morning Firefox automatically updated (I had it set that way) to v 3.6.9. I was glad I had a full Puppy back-up in another partition as I had lots of trouble getting it to work properly again.
As you thought my ink-jet printer Make and Model is described in CUPS as:
Epson Stylus Color 400 - CUPS+Gutenprint v5.2.5.
I have two pieces of good news to report:
(I) I use Wine and I have made Internet Explorer my default browser so now none of my Firefox add-ons conflicts with my CUPS menu lists, which I can now use.
(2) So I was able to select "Print Test Page" from the Maintenance drop-down list. That took 13' 56" to print in very good quality.
When I selected "Set Default Options" from the Administration drop-down list I saw that my setting was at Standard level.
I then re-set to Fast Economy and again tried "Print Test Page" this time it took a mere 46" and the output was of good qualty (with the text printed in a pleasant light grey) though the coloured circle was less impressive.
That is some 18 times faster than the first test - so I am really pleased.
My regards (and reiterated thanks)
This morning Firefox automatically updated (I had it set that way) to v 3.6.9. I was glad I had a full Puppy back-up in another partition as I had lots of trouble getting it to work properly again.
Hi again,
That test page is specific to CUPS 1.4.3, so I could scan that printed page in Windows and reprint from there, but I do not think that would be exactly equivalent.
However, from 12 years experience with Windows I'm pretty sure a fair comparison would be about 30 to 35" so I am well pleased.
My regards
The final problem is to try to get my ancient scanner working in Puppy. Forum members Aitch and Mobeus have been really helpful, but I have yet to win. I'll give everyone a rest for a couple of weeks and then raise a specific thread.
That test page is specific to CUPS 1.4.3, so I could scan that printed page in Windows and reprint from there, but I do not think that would be exactly equivalent.
However, from 12 years experience with Windows I'm pretty sure a fair comparison would be about 30 to 35" so I am well pleased.
My regards
The final problem is to try to get my ancient scanner working in Puppy. Forum members Aitch and Mobeus have been really helpful, but I have yet to win. I'll give everyone a rest for a couple of weeks and then raise a specific thread.