Quickset Wary-5.1.1-01q the Final Release
Congratz
[quote="jamesbond"]Works !! This is excellent work !!
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Wary-500m09 release candidate
Uploaded wary-500m09.iso and wary-500j09.iso.
The wary-500m09 is the release candidate as the multilingual Wary.
The Japanese remix is published as wary-500j09.
CHANGES(500m09):
The wary-500m09 is the release candidate as the multilingual Wary.
The Japanese remix is published as wary-500j09.
CHANGES(500m09):
- Removed Japanese support (Japanese remix is separated as wary-500j09)
- Removed fonts: DejaVuSans-BoldOblique.ttf, DejaVuSans-Oblique.ttf
- Removed applications:
aufs2-util-old, cpu-scaling-ondemand, didiwiki, e3_utf8, gcolor2, gdmap, gfnrename, lamesmbxplorer, pbackup, pmetatagger, pschedule, pstopwatch, ptimer, puppy-podcast-grabber, seamonkey_addon_sqlite_manager, sgtt. - Farster snapmergepuppy taken from Wary-504
- SNS updated(taken from Wary-504) but moved to an extra menu on the connectwizard.
- Video_upgrade_wizard updated taken from Wary-504
- Updated pman, sfs_load-0.8, pdict, Pschedule, Pupradio, You2pup
- Updated Russian nls
- Various kernel support including 2.6.32.28 of the Wary-510.
- re-pppoe to be replaced with the one from the LupQ-511
- some tweaks against snapmergepuppy
- Translations update
Last edited by shinobar on Wed 23 Feb 2011, 11:38, edited 5 times in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
SNS moved
I have never got success with the SNS.
Recently tested the ndswrapper with the SNS. Found the SNS does not remove the previous module which fails. Therefore, the PC freezed.
I moved SNS from the usual place. You can run the SNS from the special menu on the connectwizard if you want to use.
Recently tested the ndswrapper with the SNS. Found the SNS does not remove the previous module which fails. Therefore, the PC freezed.
I moved SNS from the usual place. You can run the SNS from the special menu on the connectwizard if you want to use.
- Attachments
-
- snsback.png
- SNS is run from the connectwizard
- (15.55 KiB) Downloaded 1711 times
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
How to remix the multilingual Wary for your country?
How to remix the multilingual Wary for your country?
Basically, install your lang_pack and remaster.
Some note on the files under /etc /root and /usr/share/doc.
Basically, install your lang_pack and remaster.
Some note on the files under /etc /root and /usr/share/doc.
- /etc/profile ... LANG
- /etc/keymap ... keyboard layout
- /etc/localtime ... link to the timezone info
- /etc/xdg/templates/_root_.jwmrc ... part of menu
- /root/.jwmrc ... menu
- /root/.jwmrc-tray ... part of menu
- /root/Choices/ROX-Filer/PuppyPin ... desktop icons
- /root/.jwm/jwm_locale ... keeps current menu language
- /root/.packages/woof-installed-package ... should keep the installed lang_pack record
- /root/Startup/fullstart ... to be excutable
- /usr/share/doc/welcome1stboot ... to be reset excutable bits
- /usr/share/doc/home.htm ... shall be copied from /usr/share/doc/help/LANGUAGE_CODE/home.htm
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
localisation projects
Zigbert has just localised 'pschedule' which would be useful
to include for a distribution like Wary Multilingual.
I've localised mtpaintsnapshot.sh for German French and Spanish.
http://www.murga-linux.com/puppy/viewto ... 476#496476
________________________________________________
I noticed that Fluppy 13 by Jemimah uses the application 'Xarchiver'
which is localised.
Having all these localised programs would be a nice feature.
__________________________________________________
to include for a distribution like Wary Multilingual.
I've localised mtpaintsnapshot.sh for German French and Spanish.
http://www.murga-linux.com/puppy/viewto ... 476#496476
________________________________________________
I noticed that Fluppy 13 by Jemimah uses the application 'Xarchiver'
which is localised.
Having all these localised programs would be a nice feature.
__________________________________________________
egg timer project
I localized a simple egg timer project as well.
http://www.murga-linux.com/puppy/viewto ... ca442672e3
_____________________________________________
http://www.murga-linux.com/puppy/viewto ... ca442672e3
_____________________________________________
Testing 5.04rc from Shinobar
Testing LIveCD and all functions tested seem fine. Goes to desktop and discovers LAN card and sound cards without issues. Really like the fact that it goes to desktop setup screen and my LIveCD has GRUB4DOS at boot.
I have a question though: Barry's WARY has while your version isCan you share why there is a difference? Just trying to understand.
Thanks in advance
I have a question though: Barry's WARY has
Code: Select all
-Version-
Kernel Linux 2.6.32.28 (i686)
Code: Select all
-Version-
Kernel Linux 2.6.31.14 (i686)
Thanks in advance
russian /usr/share/doc/nls update
I have updated po-files in /usr/share/doc/nls and added ru-line to two .desktop files.
xgettext wasn't working because I used old save-file with new installation. With new save-file everything works.
xgettext wasn't working because I used old save-file with new installation. With new save-file everything works.
- Attachments
-
- m09ru.tar.gz
- russian po-files update
- (122.56 KiB) Downloaded 519 times
future release of multilingual wary
The multilingual wary-500m09 RC is based on the wary-500-small, adding many bugfix and updates from the Barry's 5.04RC, except the kernel and initrd.gcmartin wrote:Barry's WARY haswhile your version isCode: Select all
-Version- Kernel Linux 2.6.32.28 (i686)
Code: Select all
-Version- Kernel Linux 2.6.31.14 (i686)
Barry is going to release Wary Linux 5.1 with the kernel 2.6.32.28 and also with some old kernels.
Our multilingual wary maybe the wary-500m10, with minor update in translations, will be the final release based on the wary-500-small, kernel 2.6.31.14.
Our multilingual wary with various kernels maybe provided after the Barry's Wary Linux 5.1 is finalized.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Release scedule again
The Wary Puppy 5.1 final has been released from Barry.
I suppose we are better to change the future release schedule of our Multilingual Wary...
Next release of Multilingual Wary-500m10 to be following up the Barry's 5.1 including the kernel and the initrd.
And the final release to be Wary-510m early in March.
Some concern on the kernel 2.6.31.14: There are 3 different 2.6.31.14 kernel for wary, Wary-500, Wary-500-small and of Wary-510...
I suppose we are better to change the future release schedule of our Multilingual Wary...
Next release of Multilingual Wary-500m10 to be following up the Barry's 5.1 including the kernel and the initrd.
And the final release to be Wary-510m early in March.
Some concern on the kernel 2.6.31.14: There are 3 different 2.6.31.14 kernel for wary, Wary-500, Wary-500-small and of Wary-510...
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Hi Shinobar.
So far so good.
I have few questions how to proceed .
I use bulgarian as locale ,but don't need the language pack to integrate.
Should i answer "cancel" when Puppy asks me to browse to that pack ?
Every time i restart X until i create save file, Puppy insists for that.
My second one is about pppoe-fix .In my country pppoe conections are very popular, but except in LUPQ-511 in all the other versions i had to replace original "pppoe-connect" file with the fixed one in LUPQ-511.
Wouldn't it be better if is integrated by default ?
The last question for now is about remastering .When i remaster CD i copy all from my root and etc folders, but after when i boot from remastered CD always Puppy starts with massage about no correct shutdown.Is that normal,or i am doing something wrong.
When i am asked to have separate .sfs file for drivers is that gonna help for the older machine with less RAM or doesn't matter ?
Thanks in advance and hope not to disturb you so much.
Greetings
So far so good.
I have few questions how to proceed .
I use bulgarian as locale ,but don't need the language pack to integrate.
Should i answer "cancel" when Puppy asks me to browse to that pack ?
Every time i restart X until i create save file, Puppy insists for that.
My second one is about pppoe-fix .In my country pppoe conections are very popular, but except in LUPQ-511 in all the other versions i had to replace original "pppoe-connect" file with the fixed one in LUPQ-511.
Wouldn't it be better if is integrated by default ?
The last question for now is about remastering .When i remaster CD i copy all from my root and etc folders, but after when i boot from remastered CD always Puppy starts with massage about no correct shutdown.Is that normal,or i am doing something wrong.
When i am asked to have separate .sfs file for drivers is that gonna help for the older machine with less RAM or doesn't matter ?
Thanks in advance and hope not to disturb you so much.
Greetings
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
puppyhelp pman
Tested the new pman position top-left
The input field is larger now, very good
HTML pages in /usr/share/doc/help/<language-code>/xxx.htm are shown
Because I am a little bit lazy in translating I was searching a solution to get localized pages from the web.
The pages from /root/.packages/PKGS_HOMEPAGES are english only, of course. But there is an easy way to show a localized page from the web instead. Tested example:
python will show http://www.python.org/
I have put a file PKGS_HOMEPAGES into /usr/share/locale/de
content
Try it for your language please.
apply code in /usr/bin/pman line 290
This solution is better than:
redirecting HTML page in /usr/share/doc/help/de/python.htm which was my first solution.
Note: if python_DOC is installed then the english manpage of python will be displayed. Therefore using _DOC.pet is not recommended for NLS users.
feedback welcome
PS: rox-Filer homepage has just french and italian
edited 2011-02-23
/usr/share/doc/help/<language-code>/PKGS_HOMEPAGES also might be a good location for the localized HOMEPAGES
The input field is larger now, very good
HTML pages in /usr/share/doc/help/<language-code>/xxx.htm are shown
Because I am a little bit lazy in translating I was searching a solution to get localized pages from the web.
The pages from /root/.packages/PKGS_HOMEPAGES are english only, of course. But there is an easy way to show a localized page from the web instead. Tested example:
python will show http://www.python.org/
I have put a file PKGS_HOMEPAGES into /usr/share/locale/de
content
Code: Select all
python http://wiki.python.de/
apply code in /usr/bin/pman line 290
Code: Select all
#w464 search pkg homepages db...
pPATTERN='^'"${NAME}"' '
# search localized homepages db by L18L
HOMESITE="`grep -i "$pPATTERN" /usr/share/locale/${lng2}/PKGS_HOMEPAGES | head -n 1 | cut -f 2 -d ' '`"
[ "$HOMESITE" = "" ] && HOMESITE="`grep -i "$pPATTERN" /root/.packages/PKGS_HOMEPAGES | head -n 1 | cut -f 2 -d ' '`"
if [ "$SECTION" = "" -a "$HOMESITE" != "" ];then
redirecting HTML page in /usr/share/doc/help/de/python.htm which was my first solution.
Note: if python_DOC is installed then the english manpage of python will be displayed. Therefore using _DOC.pet is not recommended for NLS users.
feedback welcome
PS: rox-Filer homepage has just french and italian
edited 2011-02-23
/usr/share/doc/help/<language-code>/PKGS_HOMEPAGES also might be a good location for the localized HOMEPAGES
Last edited by L18L on Wed 23 Feb 2011, 09:39, edited 2 times in total.
asking lang_pack and etc.
Ah... the Puppy asks 3 or 4 times. It shall be refined.yordanj94 wrote:Should i answer "cancel" when Puppy asks me to browse to that pack ?
Every time i restart X until i create save file, Puppy insists for that.
To be fixed at next release. Thanks for reporting that.yordanj94 wrote:i had to replace original "pppoe-connect" file with the fixed one in LUPQ-511.
You can copy all the files in /etc and /root, but remove the hidden file '/etc/.XLOADED'.yordanj94 wrote:When i remaster CD i copy all from my root and etc folders, but after when i boot from remastered CD always Puppy starts with massage about no correct shutdown.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
russian for pmusic
I have uploaded russian translation for Pmusic here: http://murga-linux.com/puppy/viewtopic. ... h&id=38124 Would be nice to update it in russian langpack.
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
video_upgrade_wizard
Manufacturer now OK
but missing DESCRIPTION MANUFID DEVICEID with VIA video
was with xvesa (download image)
edit different_with_xorg (see image)
but missing DESCRIPTION MANUFID DEVICEID with VIA video
Code: Select all
# video_upgrade_wizard
MANUFACTURER=VIA Technologies, Inc. [1106]
VIDEODETAILS=01:00.0 "VGA compatible controller [0300]" "VIA Technologies, Inc. [1106]" "CN896/VN896/P4M900 [Chrome 9 HC] [3371]" -r01 "VIA Technologies, Inc. [1106]" "CN896/VN896/P4M900 [Chrome 9 HC] [3371]"
edit different_with_xorg (see image)
- Attachments
-
- video_upgrade_xorg.png
- different_with_xorg
- (14.97 KiB) Downloaded 1611 times
-
- video_upgrade_wizard_bug.png
- (65.54 KiB) Downloaded 550 times
pupsaveconfig translation correction
Tried to improve translation for pupsaveconfig.
- Attachments
-
- pupsaveconfig_ru_for_m10.tar.gz
- (14.22 KiB) Downloaded 501 times
Re: video_upgrade_wizard
EDIT: Ah, yes. confirmed.L18L wrote:Manufacturer now OK
but missing DESCRIPTION MANUFID DEVICEID with VIA videoCode: Select all
# video_upgrade_wizard MANUFACTURER=VIA Technologies, Inc. [1106] VIDEODETAILS=01:00.0 "VGA compatible controller [0300]" "VIA Technologies, Inc. [1106]" "CN896/VN896/P4M900 [Chrome 9 HC] [3371]" -r01 "VIA Technologies, Inc. [1106]" "CN896/VN896/P4M900 [Chrome 9 HC] [3371]"
Shall be fixed at next release.
/usr/local/video_upgrade/video_upgrade_wizard, line 150:
Code: Select all
[ "$MANUFACTURER" = "" ] && MANUFACTURER="`echo "$VIDEODETAILS" | head -n 1 | cut -d '"' -f 4| cut -f 1 -d '['`"
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]