Puppeee 4.4 Beta Testing
Yes, it should be that way but it's always a matter of a flag set I think and I should be able to change the behavior without reinstalling... I hope.
The really annoying thing is, more than data loss on crashing, is the longer time needed on shutdown.
As I wrote I don't care about reducing write cycles, just to mention I choosed journaled ext4 filesystem for my save file this time while it could be ext2 before.
If ext2 would solve my issue I have no problems changing it however...
The really annoying thing is, more than data loss on crashing, is the longer time needed on shutdown.
As I wrote I don't care about reducing write cycles, just to mention I choosed journaled ext4 filesystem for my save file this time while it could be ext2 before.
If ext2 would solve my issue I have no problems changing it however...
Re: sound in movies
I have experienced the same.No solution found yet. Some movies suffer more then others. I have issued this problem in the puppeee forum, but there is no solution yet. It exists since version 508.p310don wrote:I have been experiencing an issue with the sound in parole while watching movies on my 1001hah. For reasons unknown, the sound randomly changes from good, to scratchy, metallic rubbish. A quick pause/restart fixes the problem, but interrupts the movie.
Anyone else seen this? Any fix?
-
- Posts: 9
- Joined: Thu 11 Mar 2010, 13:10
- Location: philippines
Uninstalling programs in pupeee4.4
Hi everyone!
I would like to ask about how to uninstall programs in pupeee 4.4
I've installed epdfview and kpdf (with lib) to my eee900. However, they are not working fine. I wanted to remove them but I can't find any program which will permit me to do that. My last resort was to delete all the files manually. However I might include the wrong or critical files.
Can anyone help me on my problem?
Thanks in advance!
BTW I'm loving my pupeee4.4 ^_^
I would like to ask about how to uninstall programs in pupeee 4.4
I've installed epdfview and kpdf (with lib) to my eee900. However, they are not working fine. I wanted to remove them but I can't find any program which will permit me to do that. My last resort was to delete all the files manually. However I might include the wrong or critical files.
Can anyone help me on my problem?
Thanks in advance!
BTW I'm loving my pupeee4.4 ^_^
-
- Posts: 9
- Joined: Thu 11 Mar 2010, 13:10
- Location: philippines
Thanks neurino.
I found something that work from here
http://www.murga-linux.com/puppy/viewtopic.php?t=64708
I think the package manager installed by default was an old one.
After installing the petget, I can now uninstall. Thanks for the quick response =)
I found something that work from here
http://www.murga-linux.com/puppy/viewtopic.php?t=64708
I think the package manager installed by default was an old one.
After installing the petget, I can now uninstall. Thanks for the quick response =)
SYSLINUX
Im a bit paranoid with "misterious" and "unknown" files/folders in the install tree, but after a lot of reading and tests i think i know syslinux well
I made some modifications inside "boot" folder... basically what im trying is to separate "syslinux installer files, "syslinux config files" and "syslinux tool files"
This way the user can delete the "install" folder after the installation, and will know a bit better what are the tools, i renamed some files thinking in simplicity for the final user
Additionally... i moved some script and config files to match this new folder structure
It was needed some changes in the scripts & configs (basically... some paths)
------------------------------------
About my changes in sysconfig.cnf ...
Lot of little changes here and too long to explain exactly, but i added some things like:
-help messages with the kernel parameters (you can see this help screens with F1 & F2 keys)
-added custom text lines at the bottom of the screen for the first entry (it can be done for the other ones)
-rebuilded "advanced boot options" submenu, with an option to return to main menu (i just ordered the entryes in this menu, nothing was erased)
-new "tools" submenu with some new tools (HDT, MHDD, new memtest version) and a option to return to main menu
-3 main menu options, for chainloading to the next device (usually grub in hd0,0), "reboot", and "power off"
-added needed modules to the folder "tools" for this new functions
-probably more things that i dont remember
I upload a .zip attached in this message with all files needed
The .zip is "cloning" the structure of a pendrive, is fully functional if you replace the .dummy files for the real ones (as explained in one of the readme.txt)
btw... all this readme.txts are here as a log of my modifications, of course must be deleted
The windows installer worked for me... but if somebody test them, please report bugs, i have more suggestions to make about syslinux, but first things first, if this works and jemmimah like it, i will try to make it better
****linux installer needs to be modifyed to install "ldsyslinux.sys" in /boot/syslinux/
Please jemmimah, take a look
I made some modifications inside "boot" folder... basically what im trying is to separate "syslinux installer files, "syslinux config files" and "syslinux tool files"
This way the user can delete the "install" folder after the installation, and will know a bit better what are the tools, i renamed some files thinking in simplicity for the final user
Additionally... i moved some script and config files to match this new folder structure
It was needed some changes in the scripts & configs (basically... some paths)
------------------------------------
About my changes in sysconfig.cnf ...
Lot of little changes here and too long to explain exactly, but i added some things like:
-help messages with the kernel parameters (you can see this help screens with F1 & F2 keys)
-added custom text lines at the bottom of the screen for the first entry (it can be done for the other ones)
-rebuilded "advanced boot options" submenu, with an option to return to main menu (i just ordered the entryes in this menu, nothing was erased)
-new "tools" submenu with some new tools (HDT, MHDD, new memtest version) and a option to return to main menu
-3 main menu options, for chainloading to the next device (usually grub in hd0,0), "reboot", and "power off"
-added needed modules to the folder "tools" for this new functions
-probably more things that i dont remember
I upload a .zip attached in this message with all files needed
The .zip is "cloning" the structure of a pendrive, is fully functional if you replace the .dummy files for the real ones (as explained in one of the readme.txt)
btw... all this readme.txts are here as a log of my modifications, of course must be deleted
The windows installer worked for me... but if somebody test them, please report bugs, i have more suggestions to make about syslinux, but first things first, if this works and jemmimah like it, i will try to make it better
****linux installer needs to be modifyed to install "ldsyslinux.sys" in /boot/syslinux/
Please jemmimah, take a look
Re: SYSLINUX
I recently installed OpenSUSE 11.4 on 2nd ssd of my eee 901 but all I've been able to do is add (lately) grub also in that drive and boot using Esc key and selecting it since I didn't find an option in syslinux to boot from another drive.sandungas wrote: -3 main menu options, for chainloading to the next device (usually grub in hd0,0), "reboot", and "power off"
Is it possible?
ATM I will not remove grub for sure from sbd but maybe it will come in handy in future or it could be nice having both options with Esc key or in puppeee boot menu.
P.S.: I would suggest OpenSUSE 11.4 with XFCE desktop env since on my 901 runs smooth and is a good alternative to Puppeee, works OTB (camera, wifi, 3G), just hotkeys missing.Of course Puppeee keeps on being my favourite
Re: SYSLINUX
yes, syslinux can chainload directly without external modules (as i did in my example), but there is a specific syslinux module to chainload (chain.c32)neurino wrote:I recently installed OpenSUSE 11.4 on 2nd ssd of my eee 901 but all I've been able to do is add (lately) grub also in that drive and boot using Esc key and selecting it since I didn't find an option in syslinux to boot from another drive.sandungas wrote: -3 main menu options, for chainloading to the next device (usually grub in hd0,0), "reboot", and "power off"
Is it possible?...
Try with this
Code: Select all
LABEL hd0
MENU LABEL Chainloader ---> hd0
COM32 /tools/chain.c32
APPEND hd0
LABEL hd1
MENU LABEL Chainloader ---> hd1
COM32 /tools/chain.c32
APPEND hd1
LABEL hd2
MENU LABEL Chainloader ---> hd2
COM32 /tools/chain.c32
APPEND hd2
EeePC bios assign differente letters to devices... depending in the boot device you selected (by using ESC key you are "swapping" drive letters)
So it depends of the number of devices... if you have 2 internals, and you are booting from pendrive probably the second internal is the third device
*If this dont works modify this way:
Code: Select all
APPEND hd0 0
APPEND hd1 0
APPEND hd2 0
This chain.c32 comes included as one of the modules in the syslinux release , the use of this module is optionalneurino wrote:there's a chain.c32 in my current puppeee boot folder, can't I only add entries to my syslinux.cfg?
(I know I'd better try it directly but how can I know what's the matter if doesn't work )
Thanks
The one you have will work, just modify syslinux.cfg to point to his path
And dont worry if the menu entryes you edited dont works... if the entry fails you will return to syslinux main menu, no harm done
Thanks sandungas,
sinc OpenSUSE is on my 2nd drive this worked on first attemp:
BUT since, as you wrote Esc key swaps drives grub's menu.lst entry doesn't work as is since it points at hd(0,0) that's correct when I boot using Esc key but should be hd(1,0) while chainloading...
Probably I should replace OpenSUSE's grub with syslinux... but since I always put timeout to 1 second to reduce boot times Esc key keeps on being however more comfortable.
Anyway I learned something new, thanks.
sinc OpenSUSE is on my 2nd drive this worked on first attemp:
Code: Select all
LABEL hd1
MENU LABEL Chainloader ---> hd1
COM32 /boot/chain.c32
APPEND hd1
Probably I should replace OpenSUSE's grub with syslinux... but since I always put timeout to 1 second to reduce boot times Esc key keeps on being however more comfortable.
Anyway I learned something new, thanks.
This is what i have (by now), i think is cool enought to post a photo
Its fully usable, folder names/structure is "user friendly", this time i focused in aesthetic changes, i added explain texts for every entry (there are 4 lines of text availables for every entry as an explain at the bottom of the screen in blue text)
Some new functions added as the chainload submenu with most common options (restored chain.32 that i removed in the last version)
All the files are extracted from "syslinux v4.04 official release"... is the last stable one, i hope all will work but please report bugs
I dont want to introduce changes in a distro that is in "release candidate" state so if something fails is easy to revert to the "old" files
The installers are fixed to place ldlinux.sys in subfolder /boot/syslinux/
ldlinux.sys is the real syslinux, in windows is hidden, protected, and marked as a "system file"
Probably lot of minor changes to syslinux.cfg that i dont remember
The intended way to install it:
1- Place "boot" folder extracted from my .zip in the root of a USB drive
2- Place the 4 puppeee files in the root of the device (dont use the sylinux.cfg that comes with puppeee)
3- Run the installer inside /boot/install/ folder (linux.sh or windows.exe)
Edit:
With the files i uploaded in my previous message i tryed to keep a changelog in several readme.txt files to avoid mistakes
This time i joined all the texts in 1 file, and ordered/erased/cleared some info there
But maybe there is more info about the changes in the old files http://www.murga-linux.com/puppy/viewto ... 147#518147
This time i tryed to "keep clean" the file/folder structure
Edit2:
Ops, i forgot to say that i modifyed the help1 & help2 messages, there was needed several modifications to this files to look nice in the eeepc screen
This messages are very explicit and now are more understandables by using puppeee paths and filenames, and a bit more ordered
Its fully usable, folder names/structure is "user friendly", this time i focused in aesthetic changes, i added explain texts for every entry (there are 4 lines of text availables for every entry as an explain at the bottom of the screen in blue text)
Some new functions added as the chainload submenu with most common options (restored chain.32 that i removed in the last version)
All the files are extracted from "syslinux v4.04 official release"... is the last stable one, i hope all will work but please report bugs
I dont want to introduce changes in a distro that is in "release candidate" state so if something fails is easy to revert to the "old" files
The installers are fixed to place ldlinux.sys in subfolder /boot/syslinux/
ldlinux.sys is the real syslinux, in windows is hidden, protected, and marked as a "system file"
Probably lot of minor changes to syslinux.cfg that i dont remember
The intended way to install it:
1- Place "boot" folder extracted from my .zip in the root of a USB drive
2- Place the 4 puppeee files in the root of the device (dont use the sylinux.cfg that comes with puppeee)
3- Run the installer inside /boot/install/ folder (linux.sh or windows.exe)
Edit:
With the files i uploaded in my previous message i tryed to keep a changelog in several readme.txt files to avoid mistakes
This time i joined all the texts in 1 file, and ordered/erased/cleared some info there
But maybe there is more info about the changes in the old files http://www.murga-linux.com/puppy/viewto ... 147#518147
This time i tryed to "keep clean" the file/folder structure
Edit2:
Ops, i forgot to say that i modifyed the help1 & help2 messages, there was needed several modifications to this files to look nice in the eeepc screen
This messages are very explicit and now are more understandables by using puppeee paths and filenames, and a bit more ordered
Pupeee Website unable to access
Hi Guys
is there a problem with the direct web page for Pupeee I get the following error:
http://puppeee.com/web/ when trying to access it.
Coming soon: Another fine website hosted by WebFaction.
Site not configured
If you are the owner of this site and weren’t expecting to see this message, it could happen for a number of reasons:
You recently created a new website record and visited it before it got set up.
You added a new domain in the control panel but didn’t create a site record to link it with an application.
Your website record is set for HTTPS, but you visited a HTTP URL (or vice-versa).
You tried to visit your website by IP address.
For more details, please take a look at the following knowledge base article: Troubleshooting — Error: Site not configured
WebFaction provides modern hosting with friendly customer support. Visit our main website for more information.
Is there another site I can got to in the meantime?
Cheers
Kazzamozz
is there a problem with the direct web page for Pupeee I get the following error:
http://puppeee.com/web/ when trying to access it.
Coming soon: Another fine website hosted by WebFaction.
Site not configured
If you are the owner of this site and weren’t expecting to see this message, it could happen for a number of reasons:
You recently created a new website record and visited it before it got set up.
You added a new domain in the control panel but didn’t create a site record to link it with an application.
Your website record is set for HTTPS, but you visited a HTTP URL (or vice-versa).
You tried to visit your website by IP address.
For more details, please take a look at the following knowledge base article: Troubleshooting — Error: Site not configured
WebFaction provides modern hosting with friendly customer support. Visit our main website for more information.
Is there another site I can got to in the meantime?
Cheers
Kazzamozz
+1 on puppeee site down
Hi,
What happened to the puppeee site? Wanted to post some kudos after I installed. I'm on a eeepc 1005ha and everything just works with puppeee! Highly recommended. fh
What happened to the puppeee site? Wanted to post some kudos after I installed. I'm on a eeepc 1005ha and everything just works with puppeee! Highly recommended. fh
Re: src2pkg
you have to turn them on in the drop down menus of the pwidgets guijomazq wrote:are the pwidgets supposed to be in there? my RC2 doesn't show them after i decide what i want in the tool.