PSI: Puppy Software Installer 07
I get this error when I try to run:
----------------------------------------------------------------------------------------------------
[Syntax error]
Expected an expression
in file "MU-Toolboxstart", line 91:
categories = natsort( categories )
^
*** glibc detected *** double free or corruption (!prev): 0x080b4350 ***
./Puppy-Software-Installer: line 47: 28365 Aborted ./MU-Toolboxstart "$thename-list###$1"
----------------------------------------------------------------------------------------------------
If I change that line 91 in MU-Toolboxstart from natsort to bubblesort (from the previous version) it seems to run fine.
----------------------------------------------------------------------------------------------------
[Syntax error]
Expected an expression
in file "MU-Toolboxstart", line 91:
categories = natsort( categories )
^
*** glibc detected *** double free or corruption (!prev): 0x080b4350 ***
./Puppy-Software-Installer: line 47: 28365 Aborted ./MU-Toolboxstart "$thename-list###$1"
----------------------------------------------------------------------------------------------------
If I change that line 91 in MU-Toolboxstart from natsort to bubblesort (from the previous version) it seems to run fine.
Did you install maybe one of my first versions of Puppybasic 2.5?
The first version did not include natsort.
In this case, please install again the latest version as alien package in PupGet:
http://noforum.de/files/wxbasic/PuppyBa ... 2.5.tar.gz
Please also type:
puppybasic -v
and post the result here.
Mark
The first version did not include natsort.
In this case, please install again the latest version as alien package in PupGet:
http://noforum.de/files/wxbasic/PuppyBa ... 2.5.tar.gz
Please also type:
puppybasic -v
and post the result here.
Mark
uploaded V04
- fixed bug: mirrorlist was not updated
- added experimental support for PupGet Packes from the "official" server ibiblio.org.
To activate these Packages:
1.) click on the button "mirrors".
2.) Now leafpad opens with the mirror-list.
Add these 2 lines:
the last line must stay empty
3.) Restart PSI, and confirm to download the lists again.
4.) Select "000 no category", click on "open"
This is a little bit slow, I hope I can optimize the speed somehow.
Here is a instruction, on how I created the list for my Server.
We will need a automatic solution for this.
Copied the filelist here to leafpad, and saved it as "unleashed.txt".
http://distro.ibiblio.org/pub/linux/dis ... ackages-1/
Then ran in the same folder this script:
Uploaded it on my server.
Mark
- fixed bug: mirrorlist was not updated
- added experimental support for PupGet Packes from the "official" server ibiblio.org.
To activate these Packages:
1.) click on the button "mirrors".
2.) Now leafpad opens with the mirror-list.
Add these 2 lines:
Code: Select all
http://dotpups.de/dotpups/pupget_packages-1-dotpups.txt
http://distro.ibiblio.org/pub/linux/distributions/puppylinux/pupget_packages-1/dotpups.txt
3.) Restart PSI, and confirm to download the lists again.
4.) Select "000 no category", click on "open"
This is a little bit slow, I hope I can optimize the speed somehow.
Here is a instruction, on how I created the list for my Server.
We will need a automatic solution for this.
Copied the filelist here to leafpad, and saved it as "unleashed.txt".
http://distro.ibiblio.org/pub/linux/dis ... ackages-1/
Then ran in the same folder this script:
Code: Select all
#!/bin/bash
cat unleashed.txt | sed -e "s#^.*\] #'http://distro.ibiblio.org/pub/linux/distributions/puppylinux/pupget_packages-1/#" -e "s/gz .*:..[^0-9]*/gz' (/" -e "s/[^A-Z]*$/)/" >tmp.txt
rm -f pupget_packages-1-dotpups.txt
touch pupget_packages-1-dotpups.txt
cat tmp.txt |while read a;do
b=`echo $a| sed -e "s#^.*/##" -e "s/\.tar\.gz.*//"`
c=`echo $a | sed "s#' .*#' #"`
d=`echo $a | sed "s#^.* (# (#"`
echo $c \"$b\" $d \\ >>pupget_packages-1-dotpups.txt
done
Mark
- Nathan F
- Posts: 1764
- Joined: Wed 08 Jun 2005, 14:45
- Location: Wadsworth, OH (occasionally home)
- Contact:
Mark -
At long last I have some time I can look this over. I see one or two things that could potentially be improved with installation of unleashed packages, but I must review my own work before I post on that. Basically there can be a call placed to pkgtool before the installation that will check for missing deps and write any that it finds out to a temporary file. I will provide some more specifics as soon as I find the time, right now is very busy.
Nathan
At long last I have some time I can look this over. I see one or two things that could potentially be improved with installation of unleashed packages, but I must review my own work before I post on that. Basically there can be a call placed to pkgtool before the installation that will check for missing deps and write any that it finds out to a temporary file. I will provide some more specifics as soon as I find the time, right now is very busy.
Nathan
Bring on the locusts ...
Dependency Checks
Mark,
Ran across these dependency problems when attempting to install Gnumeric-1.6.3. Tried installing some GTK libraries, but it did not resolve the issue. Not sure if you want these depency issues reported here or in another thread, or if you want them reported at all, but here it is:
Ran across these dependency problems when attempting to install Gnumeric-1.6.3. Tried installing some GTK libraries, but it did not resolve the issue. Not sure if you want these depency issues reported here or in another thread, or if you want them reported at all, but here it is:
Dependency-check for: Gnumeric-1.6.3-Gtk-2.8.20
These libraries miss, the application might not work without them:
libgoffice-1.so.2
libgsf-1.so.114
--------------------------------
Note:
some programs report that these libraries miss, but will work without them:
libbonobo-2.so.0
libbonobo-activation.so.4
libgconf-2.so.4
libgnomevfs-2.so.0
libjawt.so
libpanel.so.5
If you get reports about other missing libraries, search them in PSI.
Tip: search for "lib" to see most of them.
If you cannot find one, please ask in the forum.
Jam
Nathan, sounds great, I'm very curious
----------------
Jam, these libs are in Libraries/Gtk-2.8.20/Goffice-0.21-Gsf-1.14.1-Gnomeprint-1.12.1.pup
The dependency-check currently only resolves, what libraries miss, but not, which package includes them.
For that, I would need a "database" (which will be a simple textfile).
I made an extra-topic for this matter:
http://www.murga.org/~puppy/viewtopic.php?t=11150
This is somewhat complicated to build into a final grafical interface, it will take some days until I can present a first testversion.
Thanks Jam, Mark
----------------
Jam, these libs are in Libraries/Gtk-2.8.20/Goffice-0.21-Gsf-1.14.1-Gnomeprint-1.12.1.pup
The dependency-check currently only resolves, what libraries miss, but not, which package includes them.
For that, I would need a "database" (which will be a simple textfile).
I made an extra-topic for this matter:
http://www.murga.org/~puppy/viewtopic.php?t=11150
This is somewhat complicated to build into a final grafical interface, it will take some days until I can present a first testversion.
Thanks Jam, Mark
Hallo Mark !
The Puppy Software Installer Beta 04 Install without any problems with only one Click in Puppy Linux 1.8r1.
You have done really a good Job.
I have just installed Opera 9.01 with the Puppy Software Installer and the hole process has needed only one click and about 30 Seconds to download the Package and to Install it. Compliments for your hard work. Installation of DotPup packages works great at the moment.
The only thing what dont want to work at the Moment is the Installation of Debian and Ubuntu Packages.
It looks like the Puppy Software Installer dont have any routines included at the moment in the Sourcecode to handle debian or ubuntu packages.
I have yesterday downloaded the "GNU privacy guard 1.9.15" Debian Package
http://packages.debian.org/stable/utils/gnupg2
and tryed to install it with the PSI.
For some reason the package fail to be installed by using the PSI.
The other debian Package called "ONEKO" can also not be installed by using PSI on my PuppyLinux 1.08r1.
The Puppy Software Installer Beta 04 Install without any problems with only one Click in Puppy Linux 1.8r1.
You have done really a good Job.
I have just installed Opera 9.01 with the Puppy Software Installer and the hole process has needed only one click and about 30 Seconds to download the Package and to Install it. Compliments for your hard work. Installation of DotPup packages works great at the moment.
The only thing what dont want to work at the Moment is the Installation of Debian and Ubuntu Packages.
It looks like the Puppy Software Installer dont have any routines included at the moment in the Sourcecode to handle debian or ubuntu packages.
I have yesterday downloaded the "GNU privacy guard 1.9.15" Debian Package
http://packages.debian.org/stable/utils/gnupg2
and tryed to install it with the PSI.
For some reason the package fail to be installed by using the PSI.
The other debian Package called "ONEKO" can also not be installed by using PSI on my PuppyLinux 1.08r1.
The Puppy Software Installer surely looks nice, but doesn't work in my setup.
In order not to use the pup_save file (it's already 1.3GB) I made symlinks in /root for my-dotget and dotpups-downloads to point to a directory on a removable USB device.
This works for the dotpup and dotget installers, but not for the PSI.
Is there a way to make PSI work with this setup?
In order not to use the pup_save file (it's already 1.3GB) I made symlinks in /root for my-dotget and dotpups-downloads to point to a directory on a removable USB device.
This works for the dotpup and dotget installers, but not for the PSI.
Is there a way to make PSI work with this setup?
Puppy Linux 2.02 SMkey, KDE354mini, wine0.9.20, devx-qt-renamed.
Puppy Linux 2.10r1 SMkey, JWM, devx_qt_renamed_210, KDE355mini
Puppy Linux 2.10r1 SMkey, JWM, devx_qt_renamed_210, KDE355mini
Beem, I can use such a setup, /mnt/sda6 is a USB-harddisk on my computer.
I currently have no idea, why it won't work for you
-----------------------
Nevermore the PSI is very small, but you can uninstall it first, of course.
----------------------
ARAN, PSI should instll the new Debianinstaller.
Did it do it for you?
Do you have the folder
/usr/local/PB-Debian-installer ?
Mark
I currently have no idea, why it won't work for you
-----------------------
Nevermore the PSI is very small, but you can uninstall it first, of course.
----------------------
ARAN, PSI should instll the new Debianinstaller.
Did it do it for you?
Do you have the folder
/usr/local/PB-Debian-installer ?
Mark
- debernardis
- Posts: 180
- Joined: Sat 12 Nov 2005, 08:01
- Contact:
I started from a rxvt and these are the messages.
First time is without download, second with download.
Maybe that gives a hint.
First time is without download, second with download.
Code: Select all
sh-3.00# Puppy-Software-Installer
Gdk-WARNING **: locale not supported by C library
stat: cannot stat `dotpups.txt': No such file or directory
./updatepackagelist: line 45: [: =: unary operator expected
cp: cannot stat `dotpups.txt': No such file or directory
(Puppy-Software-Installer-list:22048): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
sh-3.00# Puppy-Software-Installer
Gdk-WARNING **: locale not supported by C library
mv: cannot stat `dotpups.txt': No such file or directory
ls: *dotpups.txt.*: No such file or directory
stat: cannot stat `dotpups.txt': No such file or directory
./updatepackagelist: line 45: [: =: unary operator expected
cp: cannot stat `dotpups.txt': No such file or directory
(Puppy-Software-Installer-list:22150): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
sh-3.00#
Puppy Linux 2.02 SMkey, KDE354mini, wine0.9.20, devx-qt-renamed.
Puppy Linux 2.10r1 SMkey, JWM, devx_qt_renamed_210, KDE355mini
Puppy Linux 2.10r1 SMkey, JWM, devx_qt_renamed_210, KDE355mini
debernardis,
please try this:
delete the complete folder
/usr/local/Puppy-Software-Installer
Then install it again.
If you still encounter problems, install this file in Pupget as alien package:
http://noforum.de/files/wxbasic/PuppyBa ... 2.5.tar.gz
If you still encounter problems, install this dotpup again:
http://dotpups.de/dotpups/System_Utilit ... st04MU.pup
Please tell me, which of these steps fixed your problem (if it fixes it).
Mark
please try this:
delete the complete folder
/usr/local/Puppy-Software-Installer
Then install it again.
If you still encounter problems, install this file in Pupget as alien package:
http://noforum.de/files/wxbasic/PuppyBa ... 2.5.tar.gz
If you still encounter problems, install this dotpup again:
http://dotpups.de/dotpups/System_Utilit ... st04MU.pup
Please tell me, which of these steps fixed your problem (if it fixes it).
Mark
- debernardis
- Posts: 180
- Joined: Sat 12 Nov 2005, 08:01
- Contact: