Slacko64 - 64 bit 6.0 alpha

[James C]

Screenie of the latest full install..... success from copying lib64 ......

[01micko]

Gnumeric bugfix

http://murga-linux.com/puppy/viewtopic. ... 581#797581

Test and report please.

[Jades]

Gnumeric bugfix

http://murga-linux.com/puppy/viewtopic. ... 581#797581

Test and report please.

Not done anything in depth but so far it hasn't bombed out yet. The version that came with 591 would load and allowed me to select the rows I wanted to delete and then crash as soon as I tried to bring up a menu,

Any chance of a new Slacko64 build? Seems to have been a long time since the last one came out. General performance on Merlin IV seems to be fine so far.

[James C]

Different Nvidia card..... another quick test.

Code: Select all

# report-video
Report Video 1.3 - Wed 10 Sep 2014 on Slacko64 Puppy 5.9.1 - Linux 3.12.22 x86_64
 
Chip description:
  0.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)  
  oem: NVIDIA
  product: GT218 Board - 08720002 Chip Rev
 
X Server: Xorg  Driver used: nouveau

X.Org version: 1.14.3
  dimensions:    1440x900 pixels (381x238 millimeters)
  depth of root window:    24 planes 


   ...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz

Code: Select all

# glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
4932 frames in 5.0 seconds = 986.211 FPS
5089 frames in 5.0 seconds = 1017.606 FPS
5090 frames in 5.0 seconds = 1017.844 FPS
5085 frames in 5.0 seconds = 1016.885 FPS
5091 frames in 5.0 seconds = 1018.062 FPS
5088 frames in 5.0 seconds = 1017.434 FPS

Code: Select all

-Computer-
Processor		: 4x AMD Athlon(tm) II X4 620 Processor
Memory		: 4049MB (324MB used)
Machine Type		: Physical machine
Operating System		: Slacko64 Puppy - 5.9.1
User Name		: root (root)
Date/Time		: Wed 10 Sep 2014 12:54:53 AM CDT
-Display-
Resolution		: 1440x900 pixels
OpenGL Renderer		: Gallium 0.4 on NVA8
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: HDA-Intel - HDA NVidia
Audio Adapter		: PC-Speaker - pcsp
Audio Adapter		: HDA-Intel - HDA NVidia

Working pretty well.

[James C]

Just for informational purposes......attempted to test on a recently built box but every boot attempt has failed so far.Slacko 5.9.3 fails as well but the latest Tahr release does work.

http://www.murga-linux.com/puppy/viewto ... 963#798963

Code: Select all

-Computer-
Processor		: 8x AMD FX(tm)-8320 Eight-Core Processor
Memory		: 8210MB (286MB used)
Machine Type		: Physical machine
Operating System		: tahrpup - 5.8.3.rc1
User Name		: root (root)
Date/Time		: Fri 12 Sep 2014 03:13:57 AM CDT
-Display-
Resolution		: 1920x1080 pixels
OpenGL Renderer		: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: HDA-Intel - HDA ATI SB
Audio Adapter		: HDA-Intel - HDA NVidia
Audio Adapter		: PC-Speaker - pcsp

Going to swap a newer kernel and try 5.9.3 again tomorrow.

[James C]

Went back to the older box and did a quick frugal install. Other than things already mentioned earlier in this thread it's looking good so far.

Code: Select all

# report-video
Report Video 1.3 - Fri 12 Sep 2014 on Slacko64 Puppy 5.9.1 - Linux 3.12.22 x86_64
 
Chip description:
  0.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)  
  oem: NVIDIA
  product: GT218 Board - 08720002 Chip Rev
 
X Server: Xorg  Driver used: nouveau

X.Org version: 1.14.3
  dimensions:    1440x900 pixels (381x238 millimeters)
  depth of root window:    24 planes 


   ...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz

Code: Select all

# glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
4863 frames in 5.0 seconds = 972.489 FPS
5314 frames in 5.0 seconds = 1062.652 FPS
5385 frames in 5.0 seconds = 1076.942 FPS
5382 frames in 5.0 seconds = 1076.318 FPS

Code: Select all

-Computer-
Processor		: 4x AMD Athlon(tm) II X4 620 Processor
Memory		: 4049MB (376MB used)
Machine Type		: Physical machine
Operating System		: Slacko64 Puppy - 5.9.1
User Name		: root (root)
Date/Time		: Fri 12 Sep 2014 04:00:09 AM CDT
-Display-
Resolution		: 1440x900 pixels
OpenGL Renderer		: Gallium 0.4 on NVA8
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: HDA-Intel - HDA NVidia
Audio Adapter		: PC-Speaker - pcsp
Audio Adapter		: HDA-Intel - HDA NVidia

Code: Select all

# free
             total         used         free       shared      buffers
Mem:       4049288      1475760      2573528            0        94032
-/+ buffers:            1381728      2667560
Swap:      6249248            0      6249248
# 

[James C]

.

[Puppus Dogfellow]

snappy and easy to set up on this 10 year old gateway with 2gb RAM and and the following specs:

▶—— CPU ——◀

AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Socket Designation: Socket 939
Manufacturer: AMD
Voltage: 1.1 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed of Core 0:1000 MHz, 1:1000 MHz
Socket Designation: Socket 939
Manufacturer: AMD
Voltage: 1.1 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed of Core 0:1000 MHz, 1:1000 MHz

Frequency governor : ondemand
Freq. scaling driver : powernow-k8

▶—— /proc/cpuinfo ——◀

processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 43
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 1
microcode : 0x4d
cpu MHz : 1800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good nopl pni lahf_lm cmp_legacy
bogomips : 3609.91
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 43
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 1
microcode : 0x4d
cpu MHz : 1800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good nopl pni lahf_lm cmp_legacy
bogomips : 3609.91
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

i'm having a difficulty getting it to print and tried to compile xpad but failed. has anyone got an xpad pet for this?

thanks.

(and thanks to 01micko and all others in involved in putting this together.)

-------


couldn't get the vlc packages from the ppm to install, but vlc-2.1.5-x86_64-1alien.pet works.

can't get sound on zensound, can't get recoll to compile correctly (i think that's the one that gave a Glib error--it's outdated or something). firefox, internet, and video worked out of the box. the machine seems to run quicker and quieter than under precise 5.6.1, but that may be in part because it's asked to do less (i'm running about three fewer things than usual). it hasn't got as much ready made software as the other puppies, but it seems very stable, quiet, and quick. swapping pinboards and restarts to jwm are handled with relative silence. switching the gtk theme took away my ability to switch rox icons, but i like the flat gray rounded theme. been running strong for six days, handles pet installations and uninstallations well. i'm booting off a cd on a frugal saved to a folder. i'm not sure if the save file icon was supposed to have disappeared or not, but it's not a big deal with winkey+v as the partview shortcut. it gave the remaining partition size as the folder size for the first couple of restarts, but subsequent boots had no tray icon.

___

couldn't get firefox's flash to work or a download for it to install with any available pets or flash installers, but flash works with peebee's chromium64_with_pepperflash_38.0.2125.101.sfs

[Fabio T]

There is a wvdial bug that is present in fatdog700 (all test versions), this is present also in slacko64, but not in Tahr Pup

When I try to connect my laptop with Vodafone network using wvdial or FatDog dialer, I obtain this error message:

8<--------------------------------------------------

--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: ME906E
Revision: 11.234.44.08.00
IMEI: XXXXXXXXXXXXX
+GCAP: +CGSM
OK
--> Sending: AT
OK
--> Sending: AT+CGDCONT=1,"IP","web.omnitel.t"
OK
--> Modem initialized.
wvdial: utils/wvtask.cc:409: static void WvTaskMan::_stackmaster(): Assertion `magic_number == -0x123678' failed.

8<-------------------------------------------------------------------

This is randomly present in other Puppies, but I don't know if is kernel related.
Another caveat: I can't connect with Network Wizard (net-setup.sh), PC refuses connection.

In FatDog64 (6.31 version) I can connect my PC using net-wizard.sh script (that doesn't exists in 700).

With this problems i can't test adequately FatDog700 with no Internet connection.

FatDog630 works flawlessly in both situation (3g and wifi internet connection)

Thank in advance for suggestion.

Fabio.

[smokey01]

i'm having a difficulty getting it to print and tried to compile xpad but failed. has anyone got an xpad pet for this?

I compiled xpad today with no issues. Did you have the Devx loaded?

gcc seems to be in the main distro but apparently doesn't have all the required tools.

[jangelelcangry]

Does anyone Knows how to fix the long Xorg startup time?

[Puppus Dogfellow]

i'm having a difficulty getting it to print and tried to compile xpad but failed. has anyone got an xpad pet for this?

I compiled xpad today with no issues. Did you have the Devx loaded?

gcc seems to be in the main distro but apparently doesn't have all the required tools.

the devx was loaded--haven't run slacko64 in a few weeks so i don't specifically remember what or when it failed.

could also be a case of my newbieness coming through--at the time, i think it was maybe my third or fourth attempt at compiling anything, and i'm still surprised when i succeed (now maybe five compiles later). wish i remembered....

[peebee]

Slacko64 has the same problem on bootup with multiple savefolders/files when using a usb keyboard that I reported for TahrPup6:

http://murga-linux.com/puppy/viewtopic. ... 646#807646
diagnostic by gyro:
http://murga-linux.com/puppy/viewtopic. ... 929#807929

Basically, if you have multiple savefolders and a usb keyboard that needs a special driver then it is not possible to select the required savefolder as the keyboard input is not recognised......some generic usb keyboards do work for others apparently but my generic-usb wired keyboard doesn't....

[peebee]

The firewall setup routine gives many errors - see attached (false .gz) - grep errors and maybe Loopback interface (lo) problems

[rufwoof]

AMD 64, NVidia, old CRT monitor, frugal using Grub bootloader

First boot locked up at graphical text screen
Added nouveau.modeset=0 boot parameter and boots further, but to a black screen.
Ctrl-Alt-Backspace out to command line, run xorgwizard and thinks for a second or two, shows Probing Video Hardware please wait, then crashes back to command line.
Tried booting with pfix=nox, looked to see if there was a /etc/X11/xorg.conf to delete - none found
Gave up and deleted

For this hardware its common to black screen boot. Fatdog 7 is about the only one I've come across that booted straight to desktop - I believe because it has mesa loaded in ??? (dumb end user that doesn't really know what he's talking about here).

Also noticed that it did hang around for quite a while at the searching for Optical part of the boot sequence.

[gcmartin]

Hello @RufWoof and Happy Holidays to you.

• Do you have another monitor or TV to try?
• And, did you try the other PUPPY Slackware 64bit PUP, LightHouse64? Did you have the same result?

Both this distro and the LightHouse64 distros were accomplished in about the same time period and there was some exchange of ideas occurring back then.

Here to help

[rufwoof]

Do you have another monitor or TV to try?
[*]And, did you try the other PUPPY Slackware 64bit PUP, LightHouse64? Did you have the same result?

I do (monitors), I haven't (tried Lighthouse), although as mentioned FatDog is fine.

Common problem with this CRT/Nvidia hardware and usually setting nouveau.modeset=0 does the trick after you drop to command line and xorgwizard. But in Slacko64 case xorgwizard doesn't run/work.

Just a quick test/observation from me really, as I'm content with Slacko 5.3.3 as my workhorse.

UPDATE

(Very) quick test of Lighthouse 64 Final. Downloaded ISO extracted contents to HDD and set grub to

title Lighthouse 64 (frugal on sda4)
root (hd0,3)
kernel /LH64/vmlinuz pmedia=atahd pdev1=sda4 psubdir=LH64 video=1024x768 pfix=sfsauto
initrd /LH64/initrd.xz

Booted straight to desktop correctly detecting sound, network etc. 800x600 resolution changed via exit to command line and xorgwizard - which ran ok and changed resolution to 1024x768. Updating this post using LH.

[JustGreg]

I know I am new to this version and a bit late. But, I decided to try Slacko64 out. I have installed the devx.sfs. I could not find java. The gcc compiler can have a java plugin. Is java (JRE) available for slacko64? If the answer is buried, then please point me to it. Thank you in advance for any help on this.

[peebee]

I know I am new to this version and a bit late. But, I decided to try Slacko64 out. I have installed the devx.sfs. I could not find java. The gcc compiler can have a java plugin. Is java (JRE) available for slacko64? If the answer is buried, then please point me to it. Thank you in advance for any help on this.

There isn't anything in the Slacko64 repository but there is an sfs in the Fatdog700 repository that would be worth a try....

http://ftp.nluug.nl/ftp/pub/os/Linux/di ... g/sfs/700/
java_jre-8.25.sfs 24-Oct-2014 04:41 50M
java_jre-8.25.sfs.md5sum.txt 24-Oct-2014 04:43 52
jdk-7u65-linux-x64.sfs 18-Jul-2014 11:10 121M
jdk-7u65-linux-x64.sfs.md5sum.txt

[JustGreg]

Peebee,
I do not think using Fatdog64 version 700beta, java squashed file system is a good idea. I know Fatdog64 uses the Linux From Scratch process to build the software and Slacko64 uses the Woof build process.

I did do some more research. Oracle has changed the software license and this prohibits the distribution of the binary with a Linux distribution. There is a tar.gz package for the latest version from Oracle. I have down loaded it. After I get it working with Slacko64, I will post instructions on how to added it to Slacko64.

Edit I did look at the Fatdog64 java sfs package and the Orcale supplied package. The fatdog64 sfs package has similar files and it setups the path to access Java. So, I tried the fatdog64 java sfs package. It does work so far. I have tested the installation with AngryIP IPscanner. No problems were found. This was a lot less painful that I thought.