(old)Puppy Linux Discussion Forum

Hello Raffy.

I have uploaded the save 2fs file as rar (compressed) file by the name of

"save-Deep396.2fs" at Canery's site ,link has been mentioned some where

above by Canery. The file is about 130 Mbs. I had to re-do it again to keep

the size down as the full file size was about 188 Mbs rar and 227 Mbs as

Zip.

The other reason was the previous save file had all my settings and

adsl passwords relating to net connection , skype and gizmo. Uploading is

a must for others benefit but for me it is like a bad dream , on top of

power cuts at my place i had to face too many disconnect by Server which

happens almost every ten minutes and I have to reconnect manually so

thus over all speed i get is about 6 kbps and takes about 7 hrs. which

keeps me on my toes that long that is why i shirk uploading big files.

By the way what uploading speed i can get at the ftp sit you suggested,

please let me know, with adsl2 my normal down loding speed is about 30

kbps or above.

Best regards I hope the file will prove to be useful.

Got the rar file and enjoying the build now. Thanks, charnisingh.

Lots of hours were put into this collection of applications. I just wonder how the yellow window titles can be changed.

Hi Raffy,

Thanks for downloading the rar file , i hope every thing is OK. i could not get your point regarding yellow window titles, in case you post the screen shot i will try to understand your point and if i know of any solution i will offer. i hope this will help others also and if this works fine it can be upgraded easily to upcoming versions of puppy 4. your screen shot if posted here will also show the way to others to follow. you may also e-mail me.

regards.

Hello all,
above mentioned dvd rip tool works in Dingo.

Man DVD was installed thru PSI and it is working now.

Hallo all,

aMule which is for puppy 3 or so works in Dingo too, so for what ever applications i tested in Dingo very few failed, rest all worked in Dingo.

The latest seems really nice. I am really happy to see the kernel with the megaraid driver and aic driver. This enables me to use my Dell Poweredge 1300 servers. What I did notice is it seems the scsi drivers load late in the boot process. This creates a small problem in that when puppy starts to look for a storage file it will not read anything saved on the scisi drives until it is already booted up. If that part could be moved into the time just before the storage file search happens it would be great. Also I noticed there is no tput command available is this an addon that can be put in. Currently the dotpup handler is not working. I thik it is coming along great and I really like the look. Just need a few tweaks for tput and scsi.

Hi all,

enjoy the EZpup 3.01 in action in this screen shot.

Hi all,

after i installed EZpup-3.01, vlc is not working console error message is attached here along, would any body throw some light on this message.
because it is beyond me.

However EZpup is working very nicely.

Many thanks, charnisingh, for your work. I have downloaded your program and have been able to install
hplip_for_puppy_1.7.4a on top of it using Dingo (puppy4alpha6, actually).
In that way, owners of HP-PSC all-in-one printers can benefit of their printers, having full control and acces to the scanner
and/or picture cards, using the latest puppy.
Cheers, and many thanks again!

Lluis

Hi All.

i tried open office org.-2.2. sfs in puppy 4-dingo-3.96-k2.6.24. and it works OK.

Hello all,

As i thought puppy 4 Dingo-3.96 has been upgraded now to Dingo-3.97 without any problem and all the applicatons are working OK even though there was kernel change from 2.6.24 to 2.6.21.7 and that too without any addition.

So who so ever has downloaded my " pup_save -Deep396.2fs" file from puppy ca, can upgrade to dingo-3.97 without any problem. link is given below:

http://puppylinux.ca/members/Singh-Dingo/

hallo all,

i have tested ttuuxxx light icewm 6 and wxDownload fast a downloader which requires flashgot for auto activation of the downloader thru Browser and mouse click on the download file, and happy to report that both are working very fine. enjoy these, if any questions pl post i will try to reply.

charnisingh wrote:hallo all,

i have tested ttuuxxx light icewm 6 and wxDownload fast a downloader which requires flashgot for auto activation of the downloader thru Browser and mouse click on the download file, and happy to report that both are working very fine. enjoy these, if any questions pl post i will try to reply.

Hi I actually packaged it for series 4 , you can find it here
http://murga-linux.com/puppy/viewtopic.php?t=27358 basically you need to install the 3 series package and then the 4 series zlibs package.
The extra libs were needed because blinky and free memory applet was compiled on the 3 series and weren't compatible.
I have since then started a new package where I use the existing series 4 blinky and free memory applet, But the problem so far that I have is that the 2 applications aren't docked in the taskbar, If anyone wants to give me a hand that would be great!!!
if not I guess I could spend days trying to fix it again :)lol everything I do takes days, nothing ever simple. lol
ttuuxxx
this is the second Beta Package for IceWm which I need help with.

Hi ttuuxxx,

your icewm 7 is ok in dingo i have downloaded all your latest pkgs but may not test for the time beig until there is any thing new .
thanks a lot.

Hi ttuuxxx,

tested icewm you made for puppy 4 Dingo a7 and found to be working OK with more start menu icons , all most all only network icon is missing.
tahnks.

charnisingh try this patch it will fix your menu icons for you

Hi ttuuxxx,

i tried your icewm meant for puppy 3-v1 and it asked for libImlib.so.1
which was added to user lib and started the icewm but it was not showing start menu icons then i installed your zpatch by downloading it
and all the start menu icons were now visible there.

i personally feel this one better than you made for puppy dingo 4.as blinky and mem applet dock on the taskbar whereas this was not the case in icewm meant for puppy dingo 4.

thanks.

charnisingh wrote:Hi ttuuxxx,

i tried your icewm meant for puppy 3-v1 and it asked for libImlib.so.1
which was added to user lib and started the icewm but it was not showing start menu icons then i installed your zpatch by downloading it
and all the start menu icons were now visible there.

i personally feel this one better than you made for puppy dingo 4.as blinky and mem applet dock on the taskbar whereas this was not the case in icewm meant for puppy dino 4.

thanks.

also add on zpatch, posted above it will give you 100% of all the icons .
The problem was that you've place icons in usr/local/pixmaps
where this isn't default for icewm, so I had to add that location to icewm. Plus your /etc/xdg/templates/_root_.icewm_menu <--- outdated , Its using the old icon names from the 3 series.
ttuuxxx

hi all,

dingo 3.96 was upgraded previously to 3.97 and now to 3.98 without
any problem and the applications which were installed in dingo 3.96 are working after the upgrade to 3.98 without any addition.