Trying to install Puppy Linux (Lucid) on an EEEPC with a 4GB SSD. Using UNetBootin and a USB flash drive to do so.
Previously had EEEBuntu.
Used GParted, created a new partition and a swap partition.
Looked as if all went well.
Removed the USB flash drive, and tried to reboot to Puppy.
Keep getting Grub Error 15
Is there a simple way to get rid of the grub error, and have a grub that works with Puppy?
Know enough to be dangerous, but, I am basically a newbie. Please provided details.
Thanks for your help!
Replaced EEEBuntu with Lucid Puppy, got Grub error 15
-
- Posts: 12
- Joined: Tue 10 Jan 2012, 22:22
-
- Posts: 790
- Joined: Wed 16 Apr 2008, 11:28
-
- Posts: 12
- Joined: Tue 10 Jan 2012, 22:22
Thanks for your reply, and your willingness to help.
http://murga-linux.com/puppy/viewtopic.php?t=29653
However, when I got to Image #24, it all fell apart.
Pressed Directory, but could not get to the files requested..
Yes, it was made bootable....when you created the new partition did you make it bootable?
Used the Universal Installer to attempt a full install to sda1, and followed these instructions:Secondly did you elect to put the MBR in that partition when requested as part of the installation?
http://murga-linux.com/puppy/viewtopic.php?t=29653
However, when I got to Image #24, it all fell apart.
Pressed Directory, but could not get to the files requested..
- maik.murks
- Posts: 327
- Joined: Mon 28 Mar 2011, 06:19
- Location: at home, at work or on holidays
If you don't like to get the requested files then Puppy won't find a way to your disk.canardblanc wrote:Used the Universal Installer to attempt a full install to sda1, and followed these instructions:
http://murga-linux.com/puppy/viewtopic.php?t=29653
However, when I got to Image #24, it all fell apart.
Pressed Directory, but could not get to the files requested..
The simple answer is: Yes.canardblanc wrote:Keep getting Grub Error 15
Is there a simple way to get rid of the grub error, and have a grub that works with Puppy?
The simple way: Simply install Puppy - and if there are files requested, you have to point to all of these files.
It seems to be that GRUB is working in the right way - GRUB just don't find something special which should be there. In your case it seems to be that Puppy is not there because of you don't like to find the requested files (see above).
The next time, if you try to install Puppy again, you should take care of that you USB flash drive is mounted. When you reached image #24 before clicking the directory button you have the last chance to mount the drive. The requested files should be in the root of your flash drive - at /mnt and and then select the drivename of your flash drive.
Hope this helps.
Cheers
Maik.Murks
-
- Posts: 12
- Joined: Tue 10 Jan 2012, 22:22
Thanks for the info, maik.murks.
It has nothing to do with liking.
I want to get the files, but, something happens, and the program pops up with a problem.
Also, the USB flash drive was mounted.
Don't know whether to use the '1' after /sdb.
I sure do not understand why you think I 'do not like' to get the files??!!If you don't like to get the requested files
It has nothing to do with liking.
I want to get the files, but, something happens, and the program pops up with a problem.
Also, the USB flash drive was mounted.
So, after pressing the Directory button, the files should be at: /mnt/sdb, or, would they be at: /mnt/sdb1 ?The requested files should be in the root of your flash drive - at /mnt and and then select the drivename of your flash drive.
Don't know whether to use the '1' after /sdb.
- maik.murks
- Posts: 327
- Joined: Mon 28 Mar 2011, 06:19
- Location: at home, at work or on holidays
If sdb is your flash drive, then sdb1 is the first partition of that flash drive. Since usually partitions are mounted in /mnt, you have to choose /mnt/sdb1 when you'll be asked for the Puppy files. All needed puppy files should usually be in the root directory of sdb1.canardblanc wrote:So, after pressing the Directory button, the files should be at: /mnt/sdb, or, would they be at: /mnt/sdb1 ?
Don't know whether to use the '1' after /sdb.
Cheers
Maik.Murks
-
- Posts: 12
- Joined: Tue 10 Jan 2012, 22:22
Decided to use a Live CD to install Lucid Puppy.
All went well, and according to the tutorial found here:
http://murga-linux.com/puppy/viewtopic.php?t=29653
The USB Flash drive install got too complicated.
Thanks for your help, though.
Have a great day!
All went well, and according to the tutorial found here:
http://murga-linux.com/puppy/viewtopic.php?t=29653
The USB Flash drive install got too complicated.
Thanks for your help, though.
Have a great day!