Page 1 of 2

Problems getting Wifi working

Posted: Thu 11 Oct 2012, 20:45
by ackptui
I am running live from cd wary puppy on an old desktop with 256M ram. It has a usb wifi adapter with RALink rt2870 chip, which I cannot seem to get set up in puppy. There is no installed driver in the pulldown menu for this chip. I tried installing the linux driver that came with it, but it did not show up in the menu. Likewise the envelope surrounded .inf xp driver did not work either. What to try next?

Posted: Thu 11 Oct 2012, 22:19
by cthisbear
ackptui:

Good day mate...welcome to Puppy.

Please tell us which exact Puppy version you have...
we have heaps of Puppies...

and your machine hardware specs.
We can then point you to a Puppy that can work on your machine.

I know you have given us your wireless card specs
" usb wifi adapter with RALink rt2870 chip "

but I want the brand as well.
Then we can absolutely make it work.

Also please reply back...
and if we fix you up....please edit the post as solved.

Try this version

DpupExprimo5X327 >>

http://smokey01.com/pemasu/DpupSqueeze5 ... primo5X327

squeeze-5.X.3.2.7-SCSI.iso 23-Feb-2012 15:36 150M

Chris.

Posted: Thu 11 Oct 2012, 23:40
by ackptui
cthisbear wrote:Please tell us which exact Puppy version you have...
we have heaps of Puppies...
Wary Puppy 5.3
cthisbear wrote:and your machine hardware specs.
IBM Aptiva 2170-800, 380MHz AMD K6-2, 256M ram, maxed out
cthisbear wrote:I know you have given us your wireless card specs
" usb wifi adapter with RALink rt2870 chip ", but I want the brand as well.
no brand that I can see, generic chinese button size

Thanks much.

Posted: Fri 12 Oct 2012, 00:16
by puppyluvr
:D Hello,
I also have the rt2860/5370 card in a Compaq CQ-56..
Some of my older pups need ndiswrapper and the XP driver, others I/others have compiled rt5390 against the kernel..
But the newest pups, IE Dpup Exprimo, Precise etc use the rt2800 driver with success..
Newer pups with a 3+ kernel sometimes refuse to turn on the card after boot.
Either manually turn on the card via the switch BEFORE X loads, or from the desktop, in a terminal, enter:
ifconfig wlan0 up
where "wlan0" is your interface name to turn it on, then run the network wizard.. (not Frisbee)
Good luck...

Posted: Fri 12 Oct 2012, 01:50
by ackptui
cthisbear wrote:Try this version

DpupExprimo5X327 >>

http://smokey01.com/pemasu/DpupSqueeze5 ... primo5X327

squeeze-5.X.3.2.7-SCSI.iso 23-Feb-2012 15:36 150M
Tried this, would not boot beyond the puppy graphic screen.

Wary Puppy 5.3 boots and runs well in general on this box, just need to figure out how to get the usb wifi to work, so I can connect to internet.

Posted: Fri 12 Oct 2012, 03:11
by rcrsn51
It has a usb wifi adapter with RALink rt2870 chip,
You first need to determine the vendor:product ID codes for this device. Unplug the adapter and run "lsusb". Then plug it in and run "lsusb" again.

Report back with the codes.

Posted: Fri 12 Oct 2012, 03:46
by ackptui
rcrsn51 wrote:
It has a usb wifi adapter with RALink rt2870 chip,
You first need to determine the vendor:product ID codes for this device. Unplug the adapter and run "lsusb". Then plug it in and run "lsusb" again.

Report back with the codes.
w/o adapter installed:
Bus 001 Dev 001 ID 1d6b:0001 Linux Foundation 1.1 Root Hub

w/ adapter installed
Bus 001 Dev 001 ID 1d6b:0001 Linux Foundation 1.1 Root Hub
Bus 001 Dev 002 ID 148f:5370 Ralink Technology Corp

Looks like I was wrong about the chip, 2870 was the number that was on the drivers cd.

Posted: Fri 12 Oct 2012, 07:55
by cthisbear
Ok!

Closest match..specs

http://reviews.cnet.com/desktops/ibm-ap ... 97009.html

:::

Maybe try Kinda Lucid...updated Puppy 4.31

http://murga-linux.com/puppy/viewtopic.php?t=57371

I re-uploaded it...page 6

And it's here

http://www.4shared.com/file/7sqsvU0p/klp-006.html

Just register to download it.

" Awesome news! 4shared has proven to be completely secure,
regarding user data privacy by one of the reputable web privacy solutions companies – TRUSTe."

http://blog.4shared.com/proven-privacy- ... ification/

" Therefore, even if you are new to 4shared and don’t have
enough experience with using our service, be sure that your
personal info and files are absolutely secure.

Moreover, we provide you with the whole range of options to
check and control the use of personal details, so there’s no longer
a need to worry that some data may be misused or leaked. "

Chris.

Posted: Fri 12 Oct 2012, 10:02
by rcrsn51
ackptui wrote:Bus 001 Dev 002 ID 148f:5370 Ralink Technology Corp
Try Lucid Puppy. Tempestuous has a driver called rt5370sta here.

I checked and it supports your 148f:5370 device. If this driver works for you but you still want Wary, I may be able to build you the corresponding version.

Posted: Fri 12 Oct 2012, 15:20
by ackptui
rcrsn51 wrote:Try Lucid Puppy. Tempestuous has a driver called rt5370sta here.
This did not fly; kernel panic: not synching midway thru load
cthisbear wrote:Maybe try Kinda Lucid...updated Puppy 4.31

http://murga-linux.com/puppy/viewtopic.php?t=57371

I re-uploaded it...page 6

And it's here

http://www.4shared.com/file/7sqsvU0p/klp-006.html
This booted up OK, tried the rt2870sta driver which did not find the dongle.
Did not see a driver for the rt5370.

Posted: Fri 12 Oct 2012, 17:56
by rcrsn51
ackptui wrote:This booted up OK, tried the rt2870sta driver which did not find the dongle.Did not see a driver for the rt5370.
These drivers are kernel-specific. So a driver made for Lupu won't work in a Puppy 431 variant.

Try the attached driver in Wary 5.3.

Posted: Fri 12 Oct 2012, 18:37
by ackptui
rcrsn51 wrote:rt5370sta_wary_k2.6.32.uni-2.5.0.3.pet
OK, I've got the driver file in a thumb drive. How do I get it installed into Wary?

Posted: Fri 12 Oct 2012, 19:30
by rcrsn51
Just click on it.

Posted: Fri 12 Oct 2012, 20:05
by ackptui
rcrsn51 wrote:Just click on it.
The following package has been successfully installed:
PACKAGE: rt5370sta_wary_k2.6.32.uni-2.5.0.3
CATEGORY: none
...note, this package does not have a menu entry.

Then I went into the Network Wizard to load the driver. It was in the menu, but when I tried to load it, I got this error message:

Loading rt5730sta failed with the following error message:
FATAL: Module rt5370sta not found.
Maybe try a different driver.

Posted: Fri 12 Oct 2012, 20:33
by puppyluvr
:D Hello,
In a terminal:
modprobe rt5370sta
then
lsmod
should show if it loaded, then try the wizard again...

Posted: Fri 12 Oct 2012, 21:25
by ackptui
puppyluvr wrote: should show if it loaded, then try the wizard again...
Tried to run the pet several times, always says it loaded, it shows up in the driver list of Network Wizard, when I try to load the driver from the list I get the fatal error. modprobe gives the same error. lsmod shows a list in which it is not present. *pulls out hair*

Posted: Fri 12 Oct 2012, 21:27
by rcrsn51
This is my mistake. I built the driver in Wary 522 in the belief that Wary 530 just had user-land improvements. But it also changed kernels.

I'll get back to you on this.

[Update] I went to BK's site where he keeps the kernel sources and I couldn't find k2.6.32.59 for Wary 5.3.

So your alternative is to use Wary 522.

Posted: Fri 12 Oct 2012, 21:45
by pemasu

Posted: Fri 12 Oct 2012, 22:02
by rcrsn51
Got it. Thanks. I have posted the Wary 5.3 driver on Page 1.

Posted: Sat 13 Oct 2012, 00:17
by ackptui
Thanks much to all of you. I can now see the dongle from Network Wizard. Scan still will not detect my WLAN, so I still have a ways to go to get connected. Thanks again for all your help with the driver.